Allen Bradley 100S-C Series Contactor, 230 V ac Coil, 3-Pole, 16 A, 5NO + 3NC, 525 V ac

The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary contacts are ideally suited for low-energy applications or feedback control circuits with multiple series-connected N.C. auxiliary contacts.

Redundant contactors to isolate motor (hazardous motion)
Positively guided main contacts
Red contact housings for easy identification as safety device
Protective cover prevents manual operation - yet the window allows visible ON/OFF status

DC versions incorporate a diode protection circuit

For reliability in your industrial safety applications, use this Allen Bradley contactor from Rockwell Automation. It switches an electrical circuit on and off, so you can control the function of devices like safety doors and machine guards. Thanks to contacts that open and close rapidly, the device is able to minimise the risk of equipment damage caused by electrical arcs. Its protective cover prevents unauthorised tampering, so you can be sure of proper function. A window lets you easily know if the component is on or off, while red contact housing makes it easy to identify as a safety device.

• Wide operating temperature range of -25°C to +60°C, so compatible with demanding environments
• Screw terminals for simple and secure electrical connections that need minimal maintenance
• Compact size of 81 (L) x 45 (W) x 119.5mm (D) for packing efficiency on a circuit board
• Positively guided contacts that can never be closed at the same time, for safety

• IEC
• UL
• CSA
• EN

Yes, this device is designed to accept up to five front-mounted auxiliary contacts.

Safety Contactor