RS PRO Metric O-Ring Kit FPM, Kit Contents 386 Pieces

  • RS Stock No. 705-8952
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Nitrile O-Ring Splicing Kit

Nitrile NBR70 splicing kit for fast, on the spot production of O-Rings, reducing down time. Replacement Nitrile O-Ring cord is available separately, from 1.6 mm to 8.4 mm diameter.

Features and Benefits

• A selection of O-Ring sizes
• Cost effective
• Suitable for many applications

Application Information

Nitrile (NBR) is suitable for use within applications running at a maximum continuous temperature of 120°C (or up to 150°C intermittently). Use below -30°C requires special consideration.

Note

O-Ring cord within the kit is supplied in 2m lengths

Contents

Cord in sizes of: 1.78, 2.0, 2.4, 2.62, 3.0, 3.5, 4.0, 5.0, 5.33, 5.7, 6.0, 7.0 and 8.0mm
1 x 3g bottle of cyanoacrylate adhesive
1 x Splicing jig
1 x Safety knife
1 x Tape measure
Instruction leaflet

Contents

Refer to table

Specifications
Attribute Value
Type Metric O-Ring Kit
Material FKM
Kit Contents 386 Pieces
2 Within 1 working day(s) (IE stock)
46 Within 2 working day(s) (EU stock)
Unit of sale: Each
72.29
(exc. VAT)
88.92
(inc. VAT)
units
Per unit
1 - 4
€72.29
5 - 9
€70.08
10 +
€67.80
Related Products
From Lapp, this Skintop series of cable glands ...
Description:
From Lapp, this Skintop series of cable glands have and incredibly robust construction, and are suitable for ATEX applications. The Skintop MS-M-EX-RRxe II Cable Gland has a brass nickel plated body, and a high degree of environmental resistance. With a ...
For lifting and pushing applications where flexibility and ...
Description:
For lifting and pushing applications where flexibility and high cycle requirements existNon-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity. Suitable for use in a diverse ...
Hand and air operated hydraulic pumps with load ...
Description:
Hand and air operated hydraulic pumps with load release valves and a maximum working pressure of 700 bar. To enable pump maintenance or repair a service/repair kit is available separately. A high quality manually operated, two speed hydraulic pump unitSuitable ...
The centring feature of the seals in this ...
Description:
The centring feature of the seals in this kit is a thin membrane, the ID of which equals the core diameter of the locating thread. They offer low assembly resistance to ensure a central location of the seal. Material: Nitrile ...