Figaro EM8100, Gas Sensor Evaluation Module for TGS8100

  • RS Stock No. 134-6636
  • Mfr. Part No. EM8100
  • Manufacturer Figaro
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Evaluation Module for TGS8100 Air Quality Sensor

A PCB module from Figaro which allows evaluation of the on-board TGS8100 air quality sensor. Operation is simplified by using a continuous output signal generated by the module. Although the TGS8100 operating mode uses intermittent detection via a 1-second cycle, the periodic sensor output is converted into a continuous voltage signal by the module's microprocessor. The TGS8100 sensor is mounted on a replaceable daughter-board and is sensitive to most common air contaminant gases. The module requires a regulated supply of 5Vdc and produces an output of 0-3V.

PCB Mounted Gas Sensors

Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.

Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement

Specifications
Attribute Value
Sensor Technology Gas Sensor
Featured Device TGS8100
Kit Classification Evaluation Module
8 In stock for delivery within 2 working days
Unit of sale: Each
195.10
(exc. VAT)
239.97
(inc. VAT)
units
Per unit
1 - 4
€195.10
5 +
€188.59
Related Products
The Pmod GPS utilizes the Media TeK GPS ...
Description:
The Pmod GPS utilizes the Media TeK GPS MT3329 device on a Global Top FGPMMOPA6H GPS antenna module to receive positional data from GPS satellites • Ultra-sensitive GPS module (-165d Bm)• Low power consumption• Up to 10Hz update rate• Host ...
A Click accessory module for use with Mikro ...
Description:
A Click accessory module for use with Mikro Elektronika mikroBUS™ microcontroller development boards The Air Quality 2 click sensor board utilizes the iAQ-Core Indoor Air Quality sensor that measures VOC (volatile organic compound) levels and provides equivalent predictions for CO2 ...
The X-NUCLEO-53L0A1 expansion board is based on the ...
Description:
The X-NUCLEO-53L0A1 expansion board is based on the VL53L0X ranging and gesture detection module using Flight Sense™ technology This technology allows absolute distance to be measured independent of target reflectance. The VL53L0X precisely measures the time the light takes to ...
The MS5637 peripheral module provides the necessary hardware ...
Description:
The MS5637 peripheral module provides the necessary hardware to interface the MS5637 digital barometric pressure and temperature sensor to any system that utilizes Pmod compatible expansion ports configurable for I2C communication The MS5637 sensor is a self-contained pressure and temperature ...