Interface module connection via USB.

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Orbit 3 Digital Measurement System

The Orbit 3 digital measurement system provides users with a limitless set of measuring system solutions offering a variety of interfaces to computers and PLC’s. The Orbit 3 is completely flexible and high performing eliminating the need to use analogue transducers and amplifiers. When you calibrate the transducer and electronics together it produces a linear system across the full measurement range removing the need for expensive minimum and maximum gauging masters. This digital measurement system provides users with solutions for measurement applications including temperature, load cells, pressure sensors, linear displacement, structural monitoring and gauging.

Digital measurement system controllers:
The USB controller can power up to 4 Orbit modules of most types. Some products may require additional power supply modules. Readings per second for up to 16 modules.

Connect to third party sensors:
Orbit 3 modules also provide interfaces to other transducers and control processes. The flexible AIM (Analogue Input Module) can take inputs from any transducer with a voltage of current output. The EIM (Rotary) Encoder Input Module provides a route to angle information which can facilitate part profiling and the DIOM provides control inputs and outputs.

Power supply interface modules:
These modules are uses to power a network of Orbit modules and sensors from an AC or DC power source. Most Solartron sensors and modules run on 5V, except Orbit LT and Orbit LTH which also require 24VDC. Some power supply interface modules can output both voltages.
The AC PSIM is supplied connected to a mains power module with the appropriate mains lead.
The DC PSIM is supplied with a standard 2 m cable.
24V output of DC PSIM will track the DC input.
24V current depends on external supply.
The Aux AC PSIM only supplies 24V auxiliary power for products that require additional 24V in addition to the standard 5V.
These PSIMs do not power the Orbit Network.

Excellent metrology performance
High accuracy
High resolution
Excellent repeatability
Excellent lifetime value
Low maintenance costs
wide range of campatible transducers
Fast reading rates
High data integrity
Network up to 150 transducers with one interface
Comminate with any computer or PLC
Easy to set up range of software drivers and tolls.

Temporarily out of stock - back order for despatch 07-05-2020, delivery within 2 working days
Unit of sale: Each
511.67
(exc. VAT)
629.35
(inc. VAT)
units
Per unit
1 +
€511.67
Related Products
Basic multifunction DAQ and high-density multifunction DAQ devices ...
Description:
Basic multifunction DAQ and high-density multifunction DAQ devices for use in industrial and education environments Well-suited for R&D and manufacturing, and for design-validation engineers needing fast sampling rates. High analog input sampling rate coverage High analog input up to 64 ...
High input/output voltage range meets demanding requirements for ...
Description:
High input/output voltage range meets demanding requirements for industrial applications such as driving relays and actuators Limit applications include industrial control and automation, isolated data communication, logic level interface and laboratory automation. All models are highly reliable and excellent ...
The OEM-MICODE Reader Boards are complete Read/Write system ...
Description:
The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k, Mifare 4k, Ultralight and ICODE The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, ...
Description:
The USB-B1 v2 is a low cost full RFID/NFC read/write device with USB interface that can operate in "host" connected mode or "stand alone" mode Supports Mifare Classic 1k & 4k, NTAG2xx and Ultralight. Additionally, you can read serial numbers ...