Serial Cable Assembly 500mm Male to Female, USB to Receptacle

  • RS Stock No. 741-7076
  • Mfr. Part No. C232HM-DDHSL-0
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details


The FTDI Chip 500mm USB to MPSSE cable contains a small internal electronic circuit board, utilising the FTDI FT232H. It is encapsulated into the USB connector at the end of the cable to handle all the USB signalling and protocols. The cable provides a fast and simple way to connect devices with 3.3VDC digital interfaces to the USB. The integrated FT232H device incorporates a command processor called the Multi-Protocol Synchronous Serial Engine (MPSSE). The purpose of the MPSSE command processor is to communicate with devices that use synchronous protocols (such as JTAG, SPI, or I2C) efficiently. The cable is terminated by ten individual wires with single pole connectors that can be interfaced to a male header.

Features and Benefits

Connector A is male USB
Connector B is female receptacle
USB 2.0 Hi-speed (480Mbps) and full speed (12Mbps) compatible
Maximum output current rating is 250mA at 3.3VDC on VCC
1kB receive and transmit buffers for high data throughput
Adjustable receive buffer timeout
Entire USB protocol handled on the chip – No USB-specific firmware programming required
Fully assisted hardware or X-ON/ X-OFF software handshaking
Low operating and USB suspend current low USB bandwidth consumption
Support for USB suspend and resume
Synchronous serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI, and I²C
Transmit and receive LED drive signals
UHCI/ OHCI/ EHCI host controller compatible
USB bus powered
USB type A connector for direct connection to a host or hub
Operating temperature ranges between -40 and 85°C


Automation systems
Electronic devices


ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
FCC certified
CE certified
UL2464 approved

Attribute Value
Connector A Male USB
Connector B Female Receptacle
Length 500mm
Cable Type USB
228 In stock for delivery within 2 working days
Unit of sale: Each
(exc. VAT)
(inc. VAT)
Per unit
1 - 9
10 - 19
20 - 49
50 - 99
100 +
Related Products
From Phoenix Contact, a range of shielded D-Sub ...
From Phoenix Contact, a range of shielded D-Sub serial cable assemblies This range of shielded cables have straight cable exits and are available in various lengths and pin counts. The cables have a RAL 7000 grey PVC outer jacket with ...
This straight through serial cable from RS PRO ...
This straight through serial cable from RS PRO features a D9 Male connector at one end and a Female D9 connector on the other with gold flash contacts offering a high quality and reliable connection, ideal for use with connecting ...
The SCNM9FM1MBK 1m DB9 Null Modem Cable features ...
The SCNM9FM1MBK 1m DB9 Null Modem Cable features one DB9 male and one DB9 female connector, allowing you to connect a serial device to a 9-pin serial port, or transfer files directly from PC-to-PC via a serial connectionDesigned to provide ...
These QSFP cable assembly’s 38 position printed circuit ...
These QSFP cable assembly’s 38 position printed circuit card has been designed for the higher-bandwidth signal integrity requirements associated with 10Gb/s per channel transmission as well as accommodating the industry (SFF) defined EEPROM cable signature requirements EMI termination is assure ...