OPB960T51 Optek, Through Hole Slotted Optical Switch, Transistor Output

  • RS Stock No. 908-7220
  • Mfr. Part No. OPB960T51
  • Manufacturer Optek
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MX
Product Details

OPB960, OPB970, OPB980 and OP990 Photologic Series Slotted Optical Switches

This family of Photologic® slotted optical switches, from Optek Technology, include a variety of options from a standard housing. These non-contact slotted optical switches have a range of different slot widths, output logic states, output driver circuits, aperture widths, aperture surfaces and mounting tab locations. There is also a combination of PCB mounted or wire lead options.
The device housing is an opaque plastic which reduces sensitivity to both visible and near IR light that could effect operation. The devices with a covered aperture offer protection against dust whilst open aperture offers better protection against ambient light interference.
Suitable applications for the OPB960, OPB970, OPB980 and OPB990 slotted optical switches include; speed/direction indication, rotary encoders, mechanical switch replacement, mechanical limit indication, printers and sliding door automotive.

Slotted Optical Switches, Optek Technology

Specifications
Attribute Value
Output Device Transistor
Typical Rise Time 70ns
Typical Fall Time 70ns
Mounting Type Through Hole
Package Type Pin
Number of Pins 5
Dimensions 24.63 x 6.35 x 10.8mm
Height 10.8mm
Length 24.63mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature -40°C
Slot Width 3.18mm
Width 6.35mm
Operating Temperature Range -40 → +70°C
Series OPB960
Stock check temporarily unavailable - call for stock availability
Unit of sale: Each
2.83
(exc. VAT)
3.42
(inc. VAT)
units
Per unit
1 - 9
€2.83
10 - 24
€2.74
25 - 49
€2.69
50 - 99
€2.60
100 +
€2.51
Related Products
GP1S173LCS2F is a standard, phototransistor output, transmissive photointerrupter ...
Description:
GP1S173LCS2F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to ...
GP1A173LCS3F is a standard, low voltage operation, OPIC ...
Description:
GP1A173LCS3F is a standard, low voltage operation, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector ...
The TCPT1600X01 is a compact transmissive sensor that ...
Description:
The TCPT1600X01 is a compact transmissive sensor that includes an infrared emitter and a phototransistor detector, located face-to-face in a surface mount package The tall dome design supports additional mechanical room for vertical signal encoding. Package type: surface mount Detector ...
Description:
The H21Ax series from Isocom are a family of photointerrupters They combine an NPN silicon phototransistor with an IR LED within a polycarbonate package. The package also features mounting tabs for fixing down with screws. With a 3 mm gap, ...