10-2449, Single-Sided Stripboard Epoxy Glass 160 x 100 x 1.6mm DIN 41612 FR4

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Double-Sided Stripboard

DIN Type Stripboards

Suitable for use with the KM6-II eurocard sub-rack systems

The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.
The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.
Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.

Note

Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.

Specifications
Attribute Value
Base Material Epoxy Glass Fabric Laminate
Number of Sides 1
Dimensions 160 x 100 x 1.6mm
Hole Diameter 1.02 mm, 3.81 mm
Hole Pitch 2.54 x 2.54mm
Connection DIN 41612
FR Material Grade FR4
Length 160mm
Thickness 1.6mm
Width 100mm
47 In stock for delivery within 2 working days
Unit of sale: Each
21.91
(exc. VAT)
26.95
(inc. VAT)
units
Per unit
1 - 4
€21.91
5 - 9
€20.81
10 - 39
€19.70
40 +
€18.61
Related Products
HF Verocard for circuits with a critical assemblyComponent ...
Description:
HF Verocard for circuits with a critical assemblyComponent side fully laminated with etched holes. Maximum isolation through grounding of the lamination. For reliable HF, digital and analogue circuits34 parallel circuit tracks, each with 540 holes Numerical gridDIN 41612 connector receptacle. ...
SRBP-paper FR2 15mm, solder-lacqueredEPOXY fibre-glass FR4 1.5 mm, ...
Description:
SRBP-paper FR2 15mm, solder-lacqueredEPOXY fibre-glass FR4 1.5 mm, hot air levelled (HAL-leadfree)Board size 100 x 160 x 1.6mm Hole layout 37 x 57Hole dia 1.0mm Pitch 2.54mm (0.1in)Copper thickness 35μm.
The RE520 is a brilliant copper stripboard will ...
Description:
The RE520 is a brilliant copper stripboard will suit your purpose for doing simple prototyping work or for development circuitry It features pierced copper tracks and a base material of SRBP. Stripboards also give you brilliant access to solder your ...
Pre-scored break-lines allow individual module separation2 component sides ...
Description:
Pre-scored break-lines allow individual module separation2 component sides with gold and solder stop mask coating Plated through holes Epoxy fibre-glass FR4Board size 120 x 175 x 15mm Hole dia 1.0mm.