Murata Power Solutions Non-Isolated DC-DC Converter, 5V dc Output, 1.5A

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Murata 1.5A Single Output Non-Isolated DC-DC Converter - OKI Series

The Murata PS OKI-78SR Series is built on a 10.4 by 16.5 mm, single inline package SIP module, these DC/DC converters are non-isolated switching regulator for embedded applications. Two nominal output voltages are offered, each with 1.5 Amp maximum output. Based on fixed-frequency buck switching topology, the high efficiency means very low heat and little electrical noise, requiring no external components. The ultra-wide input range is 7 to 36 Volts DC. Protection features include short circuit current limit protection. The OKI-78SR switching regulator is designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is specified as standard.

Features & Benefits

Ultra wide 7 to 36 VDC input range
Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps
Vertical or horizontal SIP-mount, small footprint package
“No heat sink” direct replacement for 3-terminal 78xx-series linear regulators
High efficiency with no external components
Short circuit protection
Outstanding thermal derating performance

Approvals

UL/EN/IEC 60950-1, 2nd Edition

Specifications
Attribute Value
Output Voltage 5V dc
Number of Outputs 1
Output Current 1.5A
Power Rating 7.5W
Mounting Type Through Hole
Package SIP
Minimum Temperature -40°C
Maximum Temperature +85°C
Efficiency 90.5%
Load Regulation ±0.25%
Line Regulation ±0.25%
Ripple And Noise 75mV Pk-Pk
Depth 16.5mm
Width 7.6mm
Series OKI-78SR
Weight 2g
Length 10.4mm
Temporarily out of stock - back order for despatch when stock is available
Unit of sale: 1 Tray of 100
342.86
(exc. VAT)
421.72
(inc. VAT)
Tray(s)
Per Tray
Per unit*
1 +
€342.86
€3.429
*price indicative
Related Products
The Traco Power TEL-2 series is a range ...
Description:
The Traco Power TEL-2 series is a range of isolated, 2 Watt, DC-DC converters in a DIP-16 package With their low profile these regulated converters require only 3.25 cm2 of space on the PCB providing a complete DC-DC converter without ...
The Tracopower THN 30WI series is the latest ...
Description:
The Tracopower THN 30WI series is the latest generation of high performance DC/DC converters with highest power density The product achieves 30W output power, while it comes in a metal case of ultra compact dimensions. These DC/DC converters have a ...
The Traco Power TVN 5WI series is a ...
Description:
The Traco Power TVN 5WI series is a ultra-low ripple and noise 5 Watt DC/DC converter in six side shielded metal package Standard features of this power supply include remote On/Off, over voltage protection, under voltage shut down and short ...
The MYMGK***06 series are miniature Mono Block type ...
Description:
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable ...