Camloc by Alcoa M10 x 1.5 Threaded Insert Hand Tool

  • RS Stock No. 668-4720
  • Mfr. Part No. KRTM10-02
  • Manufacturer Keenserts
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Keenserts Inserts


The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.

Drilling and tapping can be done without any specialist equipment, just standard drills and taps.

Manufactured from stainless steel
Suitable for use in alloys, light materials, steel and cast iron to increase the strength of the thread in these materials
In thread repair use, the defect thread can be replaced with the same nominal diameter
Significantly increases load capability in weaker materials
Special keys lock the Keensert into place eliminating rotation
Easy to install no special taps required and no tangs to remove
High resistance to torque out and pull out
Camloc Inserts & Tools available in lightweight & heavy duty versions

KEENSERTS® stainless steel inserts and studs provide strong, permanent metal threads in a range of metals, including ferrous and non-ferrous. The range includes stock numbers 668-4667, 668-4676, 668-4663, 668-4708, 668-4679, 668-4705, 668-4702, 668-4673, 668-4711

The range of KEENSERTS® installation tools ensure quick, easy and secure installation of each insert. Each tool has notches where the protruding insert keys fit to enable effective winding in of the insert. Once the insert is fully wound in, the tool can be pulled back and turned 45 degrees, so the keys are situated between the notches, and driven down through the threads of the parent material, mechanically locking it into place.
Drilling and tapping can be done without any specialist equipment, just standard drills and taps.
For a range of installation tools see stock numbers: 668-4685, 668-4724,668-4720, 668-4727, 668-4718, 668-4698, 668-4689, 668-4682, 668-4691

Specifications
Attribute Value
Thread Size Range M10 x 1.5
Temporarily out of stock - back order for despatch 14-04-2020, delivery within 2 working days
Unit of sale: Each
86.21
(exc. VAT)
106.04
(inc. VAT)
units
Per unit
1 +
€86.21
Related Products
Tough, impact resistant handle High speed steel tap ...
Description:
Tough, impact resistant handle High speed steel tap for a clean cut and long life Precision ground threads for accurate threading50 mm long blade for improved access Total length: 113 mm Thread pitch: 0,6 mm
Recovers and repairs a damaged threadSet supplied with ...
Description:
Recovers and repairs a damaged threadSet supplied with different lengths and dimensions of HELICOIL® plus threaded inserts, drill bits, HSS manual threads, manual pins, tang breakers.Green colour to check the thread is present after fitting.
The Recoil kit and hand installation tools has ...
Description:
The Recoil kit and hand installation tools has innovative and cost-effective thread repair kits are utilized worldwide in industrial and automotive maintenance situations Tap wrench no longer required Magnetic tang break tool - for easy tang removal in blind holes. ...
Introducing thread repair kits from our own brand ...
Description:
Introducing thread repair kits from our own brand RS PRO, a range of kits designed to repair various sized damaged threads from M25 to M12. These versatile and durable sets include a variety of tools such as HSS drills, taps, ...