FTDI Chip FT232BL USB to Serial UART RS232, RS422, RS485 3MBd, 32-Pin, LQFP

  • RS Stock No. 406-574
  • Mfr. Part No. FT232BL
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

FT232B - USB to Serial UART, FTDI Chip

FTDI Chip recommends using the FT323R (RS 406-580) in new designs.

The FTDI Chip FT232B is a USB to serial UART interface and an ideal solution to add USB to older designs. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com

- TTL data rate 300 Baud to 3 MBaud
- RS232 data rate 300 Baud to 3 MBaud
- RS422/RS485 data rate 300 Baud to 3 MBaud
- 384 Byte Receive buffer/128 Byte Transmit buffer for high data throughput
- Full hardware assisted or X-On/X-Off handshaking
- Support for event characters and line break condition
- Auto transmit buffer control for RS485
- Compact 32-pin (7 x 7 mm) LQFP package
- Integrated 6 MHz - 48 MHz clock multiplier
- Integrated 3.3 V regulator - no external regulator required
- 4.4 V to 5.25 V single supply operation
- UHCI/OHCI compliant

Specifications
Attribute Value
Number of Channels per Chip 1
Standard Supported RS232, RS422, RS485
Maximum Data Rate 3MBd
Mounting Type Surface Mount
Package Type LQFP
Pin Count 32
Dimensions 7 x 7 x 1.4mm
Length 7mm
Width 7mm
Height 1.4mm
Maximum Operating Temperature +70 °C
Minimum Operating Temperature 0 °C
205 In stock for delivery within 2 working days
Unit of sale: Each
5.42
(exc. VAT)
6.67
(inc. VAT)
units
Per unit
1 - 9
€5.42
10 - 49
€4.65
50 - 249
€4.32
250 - 499
€3.72
500 +
€3.48
Packaging Options:
Related Products
Texas Instruments USB hub Controller devices provide multiple ...
Description:
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 20 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ...
USB is a cable bus supporting data exchange ...
Description:
USB is a cable bus supporting data exchange between a host computer and a wide range of simultaneously accessible peripherals There is a differential signal data interface for transmit and receive communication path. The bus includes power at 5 Volts. ...
Description:
The en CoRe III are Full Speed USB controllers from Cypress, based on flexible PSoC architecture They have configurable analogue and digital blocks.The en CoRe V are Full Speed USB controllers from Cypress that support a rich instruction set.
The Microchip Technology SOIP package, surface mount 14-pin ...
Description:
The Microchip Technology SOIP package, surface mount 14-pin USB bridge microcontroller has a voltage rating ranging between 3V and 55V. This device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. It is ...