ROHM BM92A13MWV-ZE2, USB Controller, USB, 4.75 → 20 V, 40-Pin UQFN

  • RS Stock No. 145-2768
  • Mfr. Part No. BM92A13MWV-ZE2
  • Manufacturer ROHM
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

BM92A13 is a full function USB Type-C Power Delivery (PD) controller that supports USB Power Delivery using base-band communication. It is compatible with USB Type-C Specification and USB Power Delivery specification. BM92A12 includes support for the PD policy engine and communicates with an Embedded Controller or the SoC via host interface. It supports SOP, SOP’ and SOP’’ signaling, allowing it to communicate with cable marker ICs, support alternate modes.

SMBus Interface for Host Communication

Specifications
Attribute Value
Number of Transceivers 1
Protocols Supported USB
Power Supply Type Single
Typical Single Supply Voltage 4.75 → 20 V
Mounting Type Surface Mount
Package Type UQFN
Pin Count 40
Dimensions 5 x 5 x 0.865mm
Height 0.865mm
Length 5mm
Maximum Operating Temperature +105 °C
Width 5mm
Minimum Operating Temperature -30 °C
Discontinued product
Related Products
Description:
The STUSB4710 is a new family of USB power delivery controllers communicating over Type-C™ configuration channel pins (CC) to negotiate a given amount of power to be sourced to an inquiring consumer deviceThe STUSB4710 addresses provider/DFP devices such as notebooks, ...
The Microchip Technology PDIP package, through-hole mount 14-pin ...
Description:
The Microchip Technology PDIP package, through-hole mount 14-pin USB bridge microcontroller has a voltage rating ranging between 3V and 55V. This device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. It is ...
The MCP2221 is a USB-to-UART/I2C serial converter which ...
Description:
The MCP2221 is a USB-to-UART/I2C serial converter which enables USB connectivity in applications that have a UART and I2C interfaces The device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. The MCP2221 ...
USB 20 hub controller Up to four downstream ...
Description:
USB 20 hub controller Up to four downstream ports supported Supports bus powered and self powered modes Single transaction translator (TT)Bus power configurations Space saving 56-pin QFNSingle power supply requirement Internal regulator for reduced cost Integrated upstream pull-up resistor Integrated ...