Texas Instruments TUSB2077APT, USB Controller, 7-Channel, USB 2.0, 3.3 V, 48-Pin LQFP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

USB Hub Controllers, Texas Instruments

Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.

USB (Universal Serial Bus), Texas Instruments

Specifications
Attribute Value
Number of Transceivers 7
Protocols Supported USB 2.0
Power Supply Type Single
Typical Single Supply Voltage 3.3 V
Mounting Type Surface Mount
Package Type LQFP
Pin Count 48
Dimensions 7 x 7 x 1.4mm
Height 1.4mm
Length 7mm
Maximum Operating Temperature +70 °C
Width 7mm
Minimum Operating Temperature 0 °C
Temporarily out of stock - back order for despatch when stock is available
Unit of sale: Each (On a Reel of 250)
3.465
(exc. VAT)
4.262
(inc. VAT)
units
Per unit
Per Reel*
250 - 500
€3.465
€866.25
750 - 1000
€3.372
€843.00
1250 - 2250
€3.283
€820.75
2500 - 6000
€3.199
€799.75
6250 +
€3.119
€779.75
*price indicative
Related Products
FTDI Chip recommends using the FT323R (RS 406-580) ...
Description:
FTDI Chip recommends using the FT323R (RS 406-580) in new designsThe FTDI Chip FT232B is a USB to serial UART interface and an ideal solution to add USB to older designs. Royalty-free drivers for the most common operating systems are ...
USB is a cable bus supporting data exchange ...
Description:
USB is a cable bus supporting data exchange between a host computer and a wide range of simultaneously accessible peripherals There is a differential signal data interface for transmit and receive communication path. The bus includes power at 5 Volts. ...
The VNC1L is the first generation device of ...
Description:
The VNC1L is the first generation device of the FTDI Vinculum family of USB Host / Slave Controller ICs, which are designed to deliver USB Host level interfacing capabilities to embedded applications The VNC1L features two independent USB Host / ...
USB 20 hub controller Up to four downstream ...
Description:
USB 20 hub controller Up to four downstream ports supported Supports bus powered and self powered modes Single transaction translator (TT)Bus power configurations Space saving 56-pin QFNSingle power supply requirement Internal regulator for reduced cost Integrated upstream pull-up resistor Integrated ...