Battery Holders & Mounts

What is it?
A battery holder is a cavity or compartment used to house one or more batteries in a piece of equipment safely. The battery holder has flat metal or spring coiled contacts that press against the battery terminals making an electrical contact.
What does it do?
A battery holder provides a convenient method of containing the cells neatly in a casing. The holder or mount is moulded into the shape of the battery it houses.
Types
Battery holders are available in various shapes, styles and materials. The main ones are:
Chassis mount
Chassis mount battery holders can be made of metal or plastic. They are fixed to a panel, chassis or plate via fixing holes in the back of the casing base or by tabs at the side. The holders can be open faced or enclosed. Chassis mount holders and mounts accept AA, AAA, C, D AA and 9 V PP3 cell sizes.
Panel mount
Panel mount battery holders are made of plastic. They are designed to slot into a pre-prepared hole in a panel. There are two main fixing methods,
• Flange panel fixing
Secured to the panel via a flange with pre-drilled holes. These holders are draw style holders with a flip front or pull out draw compartment. They hold single larger cells like 9 V PP3 or multiple 2, 3 and 4 cylindrical AAA, AA, C and D cells.
• Screw fixing
Secured to the panel with screw thread gasket and nut. These holders are long cylindrical holders with a cap. The cap can be finger operated or slotted cap (for screwdriver release).
PCB Mount
PCB mount battery holders can be made of metal or plastic. They are designed to mount directly on to a printed circuit board. The holders have sharp pins protruding from the base of the holder. Pins are pushed through the holes on a PCB board and soldered. These battery mounts are usually open faced. PCB holders can hold single coin cells or multiple 2, 3 and 4 cylindrical AAA, AA, C, D cells
Strap and lead
Strap and lead types are a battery connector rather than a holder or mount. They are two press studs fixed into a plastic flat base. The base has two short lengths of flexible wire with tinned ends for connection. Strap and lead styles are used with 9 V PP3 cells.

...
Read more Read less

Filters

Viewing 1 - 20 of 307 products
Results per page
Description Price For Battery Size Number of Cells Mount Type Maximum Cell Diameter Dimensions Terminal Contact Type Body Material Lead Length Mounting Flange Dimensions Terminal Contact Material
RS Stock No. 489-021A
BrandRS PRO
€24.00
1 Pack of 100
Pack(s)
9V PP3 1 Strap & Lead Strap & Lead - 27 x 13 x 80mm Press Stud PP - - -
RS Stock No. 489-021
BrandRS PRO
€1.71
1 Pack of 5
Pack(s)
9V PP3 1 Wire Lead Strap & Lead - 27 x 13 x 80mm Press Stud PP - - -
RS Stock No. 594-628
BrandRS PRO
€1.01
Each
units
AA 4 Chassis Battery Holder - 57 x 30 x 30mm Coil Spring PP - - -
RS Stock No. 114-2177
Mfr. Part No.1291
BrandKeystone
€3.23
Each
units
9V PP3 1 PCB Battery Holder - - Solder Tag Aluminium - - Tin Plated Brass
RS Stock No. 410-1444
Mfr. Part No.2487
BrandKeystone
€5.09
1 Pack of 3
Pack(s)
AA 3 (AA) Chassis Battery Holder - 68.5 x 48 x 18.5mm Coil Spring ABS 152.4mm - Spring Steel
RS Stock No. 611-9598
BrandRS PRO
€0.61
Each
units
AA 2 PCB Battery Holder - 57.6 x 31.2 x 15mm Coil Spring PP - - Nickel Plated Steel
RS Stock No. 410-1450
Mfr. Part No.2490
BrandKeystone
€3.98
1 Pack of 3
Pack(s)
AA 2 (AA) Chassis Battery Holder - 68.3 x 35.4 x 18mm Coil Spring ABS 152.4mm - Spring Steel
RS Stock No. 512-3552
BrandRS PRO
€1.00
Each
units
AAA 2 Chassis Battery Holder - 52.3 x 24.7 x 13mm Coil Spring PP - - -
RS Stock No. 279-5457
Mfr. Part No.84-6
BrandKeystone
€4.10
1 Bag of 5
Bag(s)
9V PP3 1 Strap & Lead Strap & Lead - 13 x 8.5 x 25mm Press Stud ABS - - Brass
RS Stock No. 512-3580
BrandRS PRO
€0.91
Each
units
AA 2 Chassis Battery Holder - 57.6 x 31.2 x 15mm Coil Spring PE - - -
RS Stock No. 172-5845
Mfr. Part No.1294
BrandKeystone
€3.48
Each
units
9V PP3 1 PCB Battery Holder - 53.9 x 29.6 x 20.3mm Solder Tag Glass Filled Nylon - 23.8 x 37.4mm Steel
RS Stock No. 508-116
Mfr. Part No.BX0023/GY
BrandBulgin
€7.24
Each
units
9V PP3 1 Panel Battery Holder - 54 x 34.5 x 24.5mm Solder Tag Glass Filled Nylon - - Phosphor Bronze
RS Stock No. 279-4959
Mfr. Part No.2466
BrandKeystone
€1.09
Each
units
AAA 1 PCB Battery Holder - 50 x 13 x 12.7mm Coil Spring PP - - Spring Steel
RS Stock No. 611-9576
BrandRS PRO
€0.50
Each
units
AA 1 PCB Battery Holder - 57.2 x 16.4 x 14.8mm Coil Spring PP - - Nickel Plated Steel
RS Stock No. 489-914A
Mfr. Part No.BX0036
BrandBulgin
€46.04
1 Pack of 25
Pack(s)
C 1 (C) PCB Battery Holder - 59.1 x 30.2 x 25.1mm Leaf Spring Glass Filled Nylon - - Nickel Silver
RS Stock No. 410-1438
Mfr. Part No.2484
BrandKeystone
€6.43
1 Pack of 3
Pack(s)
AAA 3 (AAA) Chassis Battery Holder - 54 x 37.5 x 15mm Coil Spring ABS 152.4mm - Spring Steel
RS Stock No. 162-1736
Mfr. Part No.796136-1
€1.02
Each (On a Reel of 400)
units
CR2032 1 PCB Battery Holder - - Leaf Spring Glass Filled PBT - - Phosphor Bronze
RS Stock No. 718-8457
Mfr. Part No.796136-1
€1.57
Each
units
CR2032 1 PCB Battery Holder - - Leaf Spring Glass Filled PBT - - Phosphor Bronze
RS Stock No. 489-914
Mfr. Part No.BX0036
BrandBulgin
€3.03
Each
units
C 1 PCB Battery Holder - 59.1 x 30.2 x 25.1mm Leaf Spring Glass Filled Nylon - - Nickel Silver
RS Stock No. 707-4960
Mfr. Part No.D cell End Cap
BrandYuasa
€35.09
1 Pack of 100
Pack(s)
D 1 PCB Battery Holder 34.9mm 21.9 x 35.8mm - - - - -
Related Products
PCB mountable coin cell holders Raised rim surrounding ...
Description:
PCB mountable coin cell holders Raised rim surrounding the holder to hold the cell in place Contacts are spring steel nickel plate over copper
Robust but lightweight construction Insulated terminals Single and ...
Description:
Robust but lightweight construction Insulated terminals Single and multiple configurations Nickel plated brass tags for ease of soldering
Specially designed for installation of memory saving batteries ...
Description:
Specially designed for installation of memory saving batteries on printed circuit boards, these battery holders hold 1 or 2 lithium batteries for 3 or 6 V applicationsInstallation is identical for the different models. The base features lifting feet.The 101 model, ...
Specially designed for installation of memory saving batteries ...
Description:
Specially designed for installation of memory saving batteries on printed circuit boards, these battery holders hold 1 or 2 lithium batteries for 3 or 6 V applicationsInstallation is identical for the different models. The base features lifting feet.The 101 model, ...