Distribution Blocks

The primary function of a distribution block is to supply power more efficiently to a series of devices. The secondary function is to isolate short circuit incidents to prevent complete shutdown from occurring. Distribution blocks can handle a range of frequencies and currents. Using distribution blocks requires only one large wire on the input side to link each connected device back to the power source. This eliminates the need for separate wiring of each device. 


What are distribution blocks used for?

Distribution blocks are used in various industries:

  • Heating/cooling for operating heaters, cooling systems and ventilation equipment.
  • Power distribution control in the form of voltage transformers, uninterrupted power supply units and distribution cabinets. 
  • Solar, wind and turbine as the power supply to distribute energy.
  • Electrical vehicles for charging stations.
  • Electronic automation, including elevators, lifting equipment and conveyor systems.

Types of distribution blocks

The two main types of distribution block are:

  • Bussed (enclosed) blocks, which allow for a larger input cable to be split out into smaller cables for branch circuits.
  • Independent blocks, which enable multiple individual circuits to be routed to a single location as they are not connected to each other.

...
Read more Read less

Filters

Viewing 21 - 40 of 73 products
Results per page
Description Price Number of Ways Termination Method Wire Size Housing Material IP Rating Current Rating Voltage Rating Cable CSA Length Width Height Colour Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 187-9903
Mfr. Part No.3273332
€34.00
1 Bag of 10
Bag(s)
7 Push In 26 → 12 (Solid) AWG, 26 → 14 (Flexible) AWG Polyamide - 57A 450 V 0.14 → 2.5 (Flexible) mm², 0.14 → 4 (Solid) mm² 28.6mm 25.55mm 21.7mm Blue - -
RS Stock No. 138-3502
Mfr. Part No.1561670000
BrandWeidmuller
€61.21
1 Pack of 5
Pack(s)
2 (Input), 2 (Output) Screw 12 → 2 AWG Wemid - 125 (UR) A, 202 A 1 kV ac/dc, 600 V 25 mm², 35 mm² 22.2mm 49.3mm 55.4mm Green +130°C -50°C
RS Stock No. 138-3483
Mfr. Part No.1561910000
BrandWeidmuller
€44.93
1 Pack of 3
Pack(s)
2 (Input), 6 (Output) Screw - Wemid - 100A 690 V ac/dc 10 mm², 25 mm² 30.2mm 49mm 55.4mm Grey +130°C -50°C
RS Stock No. 138-3505
Mfr. Part No.1561780000
BrandWeidmuller
€53.35
1 Pack of 3
Pack(s)
2 (Input), 2 (Output) Screw 8 AWG Wemid - 160 (UR) A, 300 A 1 kV ac/dc, 600 V 50 mm², 70 mm² 32.9mm 53.1mm 63mm Blue +130°C -50°C
RS Stock No. 187-9907
Mfr. Part No.3273376
€71.20
1 Bag of 8
Bag(s)
19 Push In 26 → 12 (Solid) AWG, 26 → 14 (Flexible) AWG Polyamide - 57A 450 V 0.14 → 2.5 (Flexible) mm², 0.14 → 4 (Solid) mm² 28.6mm 56.45mm 21.7mm Blue - -
RS Stock No. 277-9786
Mfr. Part No.0 048 44
BrandLegrand
€14.96
Each
units
13 Screw Down - PC IP20 100A 400 V ac 1.5 → 16 mm², 6 → 25 mm² 113mm - - Blue +40°C -5°C
RS Stock No. 100-3919
Mfr. Part No.1SNL308010R0000
BrandEntrelec
€15.05
Each
units
7 Screw Down 14 → 10 (End 2) AWG, 14 → 4 (End 1) AWG Polyamide IP20 80A 1 kV ac, 1.5 kV dc 2.5 → 16 (End 1) mm², 2.5 → 16 (End 2) mm² 28.4mm 50.2mm 66mm Grey +110°C -55°C
RS Stock No. 868-0736
BrandRS PRO
€36.92
Each
units
26 Screw 35 mm² PC - - - - 99mm 40mm 43mm Blue +85°C -
RS Stock No. 187-9906
Mfr. Part No.3273356
€54.90
1 Bag of 8
Bag(s)
13 Push In 26 → 12 (Solid) AWG, 26 → 14 (Flexible) AWG Polyamide - 57A 450 V 0.14 → 2.5 (Flexible) mm², 0.14 → 4 (Solid) mm² 28.6mm 41mm 21.7mm Red - -
RS Stock No. 187-9904
Mfr. Part No.3273334
€34.00
1 Bag of 10
Bag(s)
7 Push In 26 → 12 (Solid) AWG, 26 → 14 (Flexible) AWG Polyamide - 57A 450 V 0.14 → 2.5 (Flexible) mm², 0.14 → 4 (Solid) mm² 28.6mm 25.55mm 21.7mm Red - -
RS Stock No. 138-3495
Mfr. Part No.1560670000
BrandWeidmuller
€29.00
1 Pack of 5
Pack(s)
2 (Input), 2 (Output) Screw 14 → 4 AWG Wemid - 90 (UR) A, 152 A 1 kV ac/dc, 600 V 16 mm², 25 mm² 17.8mm 49.3mm 55.7mm Blue +130°C -50°C
RS Stock No. 138-3504
Mfr. Part No.1561770000
BrandWeidmuller
€53.35
1 Pack of 3
Pack(s)
2 (Input), 2 (Output) Screw 8 AWG Wemid - 160 (UR) A, 300 A 1 kV ac/dc, 600 V 50 mm², 70 mm² 32.9mm 53.1mm 63mm Grey +130°C -50°C
RS Stock No. 138-3486
Mfr. Part No.1561930000
BrandWeidmuller
€44.93
1 Pack of 3
Pack(s)
2 (Input), 6 (Output) Screw - Wemid - 100A 690 V ac/dc 10 mm², 25 mm² 30.2mm 49mm 55.4mm Green +130°C -50°C
RS Stock No. 675-8922
Mfr. Part No.0 371 71
BrandLegrand
€24.04
1 Pack of 5
Pack(s)
1 Screw Down 10 AWG Metal - 23A 800 V 4mm² 52.2mm 6mm 46.4mm Green, Yellow +55°C -30°C
RS Stock No. 187-9900
Mfr. Part No.3270157
€58.74
1 Bag of 5
Bag(s)
16 Push In Flexible) AWG, 26 → 14 (Solid Polyamide - 37A 250 V 0.14 → 1.5 (Flexible) mm², 0.14 → 2.5 (Solid) mm² 63.6mm 8.3mm 54mm Black, Grey - -
RS Stock No. 239-5136
Mfr. Part No.7601.2101.8
BrandKopp
€19.68
Each
units
2 - - - - 16A - - - - - - - -
RS Stock No. 100-3921
Mfr. Part No.1SNL316010R0000
BrandEntrelec
€37.13
Each
units
8 Screw Down 6 → 2/0 (End 1) AWG, 10 → 6 (End 1) AWG, 14 → 6 (End 2) AWG Polyamide IP10 160A 1 kV ac, 1.5 kV dc 2.5 → 16 (End 2) mm², 6 → 16 (End 1) mm², 10 → 70 (End 1) mm² 28.2mm 50.7mm 75mm Grey +110°C -55°C
RS Stock No. 138-3506
Mfr. Part No.1561820000
BrandWeidmuller
€53.35
1 Pack of 3
Pack(s)
2 (Input), 2 (Output) Screw 8 AWG Wemid - 160 (UR) A, 300 A 1 kV ac/dc, 600 V 50 mm², 70 mm² 32.9mm 53.1mm 63mm Brown +130°C -50°C
RS Stock No. 868-0780
BrandRS PRO
€7.18
Each
units
- - - PC - - 250 V - 57mm 41.5mm 38mm Black +90°C -
RS Stock No. 138-3493
Mfr. Part No.1562090000
BrandWeidmuller
€75.82
1 Pack of 1
Pack(s)
2 (Input), 9 (Output) Screw 350 AWG Wemid - 310 (UR) A, 353 A 1 kV ac, 1.5 kV dc, 600 V 16 mm², 25 mm², 35 mm², 185 mm² 52.6mm 67mm 94mm Grey +130°C -50°C
Related Products
Commoning terminals equipped with plastic housing to provide ...
Description:
Commoning terminals equipped with plastic housing to provide IP 2X protectionThese terminals are supplied with captive screws that have been loosened to facilitate mounting.May be mounted on DIN rail, support or 12 x 2 flat bar.
Commoning terminals equipped with plastic housing to provide ...
Description:
Commoning terminals equipped with plastic housing to provide IP 2X protectionThese terminals are supplied with captive screws that have been loosened to facilitate mounting.May be mounted on DIN rail, support or 12 x 2 flat bar.
Distribution terminal blocks provide fantastic reliability and are ...
Description:
Distribution terminal blocks provide fantastic reliability and are of the highest quality available across the entire range of terminals • Easy to handle• All models rated to various voltages• Compression clamp terminals accept cable up to 4 mm², have a ...
Screw-connection terminal blocks ensure an electrical connection between ...
Description:
Screw-connection terminal blocks ensure an electrical connection between 2 solid-centre or flexible conductors Green and yellow for the earth conductors.One junction (1 input / 1 output) - metal stand.