Fuse Holder Accessories

Fuse holder accessories are all the component and additional parts used in the construction of fuse holders. Fuses are a device used for circuit protection, by providing a weak link in the circuit, and breaking when an overcurrent or short circuit occurs. They can be removed from the fuse holder after the fuse has blown, and replaced with a new one.

What are fuse holders used for?

Fuse holders provide a housing for fuses within a circuit. The metal contacts on the fuse holder connect to the metal caps on the fuse, allowing current to flow through them. When a fault is detected, the fuse will blow, preventing further damage to the circuit or attached devices.

Types of fuse holder accessories

Different fuse holders are designed to be used with different types of fuses. There are a wide range of fuse holder accessories available, but some common types include:

  • Assembly accessories, which can assist in setting up the fuse holder
  • Mounting accessories, allowing the fuse holder to be attached
  • Caps and covers
  • Adapters

...
Read more Read less

Filters

Viewing 1 - 20 of 103 products
Results per page
Description Price Fuse Holder Accessory Type Series
RS Stock No. 878-3236
Mfr. Part No.896-178
BrandLittelfuse
€0.451
Each (In a Pack of 50)
units
Plastic Box Maxi
RS Stock No. 379-274
Mfr. Part No.1331.0044
BrandSchurter
€0.448
Each (In a Pack of 20)
units
Plug-On Caps with Pigtails -
RS Stock No. 738-2784
Mfr. Part No.FHAC0001ZXJ
BrandLittelfuse
€5.39
Each
units
Water Proof Holder -
RS Stock No. 173-9659
Mfr. Part No.1331.0044
BrandSchurter
€0.277
Each (In a Box of 2000)
units
Plug-On Caps with Pigtails -
RS Stock No. 414-213
Mfr. Part No.DIN-20-32
€3.044
Each (In a Pack of 10)
units
DIN Rail Adapter -
RS Stock No. 376-8995
Mfr. Part No.Z218223
BrandMersen
€1.364
Each (In a Pack of 10)
units
Multi-Pole Assembly Kit -
RS Stock No. 360-5670
Mfr. Part No.FBDIN1
BrandLittelfuse
€3.648
Each (In a Pack of 5)
units
DIN Rail Adapter -
RS Stock No. 354-408
BrandRS PRO
€1.196
Each (In a Pack of 10)
units
DIN Rail Adapter -
RS Stock No. 342-0205
Mfr. Part No.255.1000.0001
BrandWickmann
€16.84
Each
units
Battery Clamp -
RS Stock No. 174-0748
Mfr. Part No.02540101Z
BrandLittelfuse
€1.308
Each (In a Pack of 5)
units
- 254
RS Stock No. 174-0277
Mfr. Part No.03420004HXL
BrandLittelfuse
€2.396
Each (In a Box of 100)
units
- 342
RS Stock No. 174-0637
Mfr. Part No.01530002H
BrandLittelfuse
€1.44
Each (In a Pack of 10)
units
- 155
RS Stock No. 876-8467
Mfr. Part No.66000001009
BrandLittelfuse
€0.941
Each (In a Pack of 50)
units
- 660
RS Stock No. 174-0272
Mfr. Part No.03420006Z
BrandLittelfuse
€19.946
Each (In a Box of 20)
units
- 342
RS Stock No. 867-6841
Mfr. Part No.4303.2037.03
BrandSchurter
€8.193
Each (In a Pack of 50)
units
Fusedrawer KEC
RS Stock No. 418-502
Mfr. Part No.20BS
€5.08
Each (In a Pack of 2)
units
Back Stud -
RS Stock No. 876-7714
Mfr. Part No.0098.0042
BrandSchurter
€1.474
Each (In a Pack of 25)
units
Hex Nut FIZ/FUL
RS Stock No. 867-6848
Mfr. Part No.4303.2401
BrandSchurter
€2.80
Each
units
Fusedrawer KD
RS Stock No. 182-1523
Mfr. Part No.170H0066
€25.455
Each (In a Box of 10)
units
- 170H
RS Stock No. 665-9526
Mfr. Part No.DF14AP
€24.87
1 Bag of 10
Bag(s)
Multi-Pole Assembly Kit -
Related Products
The Cooper Bussmann is a thermoplastic fuse block ...
Description:
The Cooper Bussmann is a thermoplastic fuse block for 5x20mm fuses It has PCB type of mounting and a voltage rating of 250VAC. • High current rating of 6.3A• Maximum operating temperature is of 110°C.
For 5 mm x 20 mm fuses Fuse ...
Description:
For 5 mm x 20 mm fuses Fuse carriers are interchangeable Vertical (-V) or horizontal (-H) mounting Fuse carrier and knob are spring loaded bayonet type with screwdriver slot Shock safety High temperature thermoplastic Glow wire test: 960°C
Radio frequency shielded fuse holders eliminate possible transmission ...
Description:
Radio frequency shielded fuse holders eliminate possible transmission or reception of RF signals through the hole in the chassis in which the fuse holder is mounted A rubber O-ring and conductive gasket maintain RF shielding and watertight construction.
Designed to eliminate the possibility of electrical shock ...
Description:
Designed to eliminate the possibility of electrical shock The universal fuse holder body will accept 3AB, 3AG, 5 ´ 20mm, and 2AG fuse sizes depending on knob selected. Permits inventory reduction of bodies and provides knob interchange versatility. Anti-tease feature ...