Fuse Holder Accessories

Fuse holder accessories are all the component and additional parts used in the construction of fuse holders. Fuses are a device used for circuit protection, by providing a weak link in the circuit, and breaking when an overcurrent or short circuit occurs. They can be removed from the fuse holder after the fuse has blown, and replaced with a new one.

What are fuse holders used for?

Fuse holders provide a housing for fuses within a circuit. The metal contacts on the fuse holder connect to the metal caps on the fuse, allowing current to flow through them. When a fault is detected, the fuse will blow, preventing further damage to the circuit or attached devices.

Types of fuse holder accessories

Different fuse holders are designed to be used with different types of fuses. There are a wide range of fuse holder accessories available, but some common types include:

  • Assembly accessories, which can assist in setting up the fuse holder
  • Mounting accessories, allowing the fuse holder to be attached
  • Caps and covers
  • Adapters

...
Read more Read less

Filters

Viewing 21 - 40 of 103 products
Results per page
Description Price Fuse Holder Accessory Type Series
RS Stock No. 171-6798
Mfr. Part No.H15-V-1
€2.39
Each (In a Pack of 5)
units
- H15
RS Stock No. 174-0638
Mfr. Part No.03420006Z
BrandLittelfuse
€21.94
1 Pack of 1
Pack(s)
- 342
RS Stock No. 174-0647
Mfr. Part No.65900000009
BrandLittelfuse
€1.101
Each (In a Pack of 10)
units
- 656
RS Stock No. 867-6841
Mfr. Part No.4303.2037.03
BrandSchurter
€8.193
Each (In a Pack of 50)
units
Fusedrawer KEC
RS Stock No. 418-502
Mfr. Part No.20BS
€5.08
Each (In a Pack of 2)
units
Back Stud -
RS Stock No. 174-0268
Mfr. Part No.03400313Z
BrandLittelfuse
€32.193
Each (In a Box of 20)
units
- 340
RS Stock No. 174-0622
Mfr. Part No.05200004Z
BrandLittelfuse
€1.177
Each (In a Pack of 10)
units
- 520
RS Stock No. 182-1349
Mfr. Part No.170H0099
€126.519
Each (In a Box of 10)
units
Microswitch -
RS Stock No. 418-524
Mfr. Part No.63/100BS
€10.725
Each (In a Pack of 2)
units
Back Stud -
RS Stock No. 876-7714
Mfr. Part No.0098.0042
BrandSchurter
€1.474
Each (In a Pack of 25)
units
Hex Nut FIZ/FUL
RS Stock No. 867-6848
Mfr. Part No.4303.2401
BrandSchurter
€2.80
Each
units
Fusedrawer KD
RS Stock No. 707-7243
Mfr. Part No.GRS32-A
€9.24
Each
units
Adapter Kit -
RS Stock No. 174-0631
Mfr. Part No.65800001009
BrandLittelfuse
€2.487
Each (In a Pack of 10)
units
- 658
RS Stock No. 174-0656
Mfr. Part No.0PTF0078P
BrandLittelfuse
€0.209
Each (In a Pack of 50)
units
- -
RS Stock No. 182-1422
Mfr. Part No.EC-250
€31.29
Each
units
- -
RS Stock No. 174-0269
Mfr. Part No.01500079Z
BrandLittelfuse
€3.152
Each (In a Box of 200)
units
- 155
RS Stock No. 174-0648
Mfr. Part No.03540101ZXGY
BrandLittelfuse
€7.83
1 Pack of 1
Pack(s)
- 354
RS Stock No. 342-0198
Mfr. Part No.255.0808.0001
BrandWickmann
€12.93
Each
units
Insulating Nut -
RS Stock No. 182-1453
Mfr. Part No.EC-600
€37.13
Each
units
- -
RS Stock No. 182-1427
Mfr. Part No.170H0235
€38.339
Each (In a Box of 12)
units
Microswitch -
Related Products
The Cooper Bussmann is a thermoplastic fuse block ...
Description:
The Cooper Bussmann is a thermoplastic fuse block for 5x20mm fuses It has PCB type of mounting and a voltage rating of 250VAC. • High current rating of 6.3A• Maximum operating temperature is of 110°C.
For 5 mm x 20 mm fuses Fuse ...
Description:
For 5 mm x 20 mm fuses Fuse carriers are interchangeable Vertical (-V) or horizontal (-H) mounting Fuse carrier and knob are spring loaded bayonet type with screwdriver slot Shock safety High temperature thermoplastic Glow wire test: 960°C
Radio frequency shielded fuse holders eliminate possible transmission ...
Description:
Radio frequency shielded fuse holders eliminate possible transmission or reception of RF signals through the hole in the chassis in which the fuse holder is mounted A rubber O-ring and conductive gasket maintain RF shielding and watertight construction.
Designed to eliminate the possibility of electrical shock ...
Description:
Designed to eliminate the possibility of electrical shock The universal fuse holder body will accept 3AB, 3AG, 5 ´ 20mm, and 2AG fuse sizes depending on knob selected. Permits inventory reduction of bodies and provides knob interchange versatility. Anti-tease feature ...