Aluminium Capacitors

Aluminium capacitors are a type of electrolytic capacitor. A capacitor is a two-terminal electrical component that can store energy, somewhat like a battery. Aluminium capacitors are polarised, meaning that the energy can only flow in a single direction. High purity grade Aluminium is used to create the anode foil and the cathode foil upon which electrolysis is applied to form an extremely thin insulating layer of aluminium oxide, which acts as the dielectric of the capacitor. Aluminium capacitors are found in many applications such as power supplies, computer motherboards and domestic appliances.

Dependent on the nature of the Electrolyte, capacitors may also be referred to as “wet” meaning they have a liquid electrolyte or solid. Solid Electrolytes may be hybridized with Aluminium but normally refers to Polymer or Tantalum based capacitors


Types of Aluminium Capacitors


Aluminium Electrolytic Capacitors


Electrolytic capacitors consist of an electrolyte which is a liquid or gel that consists of a large concentration of ions, and when voltage is applied across its terminals, it leads to charges being stored on the anode and cathode foils. The electric charge that can be stored by the capacitor is measured in Farads but usually in the range from nanofarads to millifarads. .Aluminium capacitors are used where high capacitance values to provide smoothing and filtering functions in the circuit. Commonly used in DC Power supplies due to their large capacitance and their compact size which helps to reduce the ripple voltage. Aluminium Electrolytic capacitors have reasonable Equivalent Series Resistance (ESR) but have the lowest leakage current from all capacitor types.


Polymer Electrolytic Capacitors


Polymer capacitors (also are known as polymer electrolytic capacitors or polymer e caps) have conductive polymer as their electrolyte material within a layered aluminium design. These capacitors combine unique properties from the polymer material in terms of high conductivity, extended temperature range and no risk of drying out – to make a capacitor that offers large capacitance and very low ESR (equivalent series resistance) with high ripple current capability and offer a longer operating life. Polymer capacitors offer a lot of package options between 2.2 to 470 microfarad


Hybrid Capacitors


Hybrid capacitors (polymer hybrid aluminium capacitors) are a mix of wet electrolyte and solid polymer. In this sense, they combine the best of both electrolytes. These capacitors offer high endurance, low ESR, and a high tolerance for ripple current. Hybrid capacitors also feature stable electric characteristics at high frequencies whilst maintaining reliability. The liquid electrolyte keeps the Leakage current very low and also allows self-repairing of the aluminium foils which prevent a drop in capacitance.


...
Read more Read less

Filters

Viewing 61 - 80 of 19256 products
Results per page
Description Price Capacitance Technology Voltage Mounting Type Dimensions Height Length Depth Diameter Minimum Operating Temperature Maximum Operating Temperature Lead Pitch Construction Lifetime
RS Stock No. 170-1225
BrandRS PRO
€0.207
Each (In a Bag of 500)
units
680µF Electrolytic 35V dc Through Hole 10 (Dia.) x 20mm 20mm 20mm - 10mm -40°C +105°C 5mm - 2000h
RS Stock No. 711-0993
BrandRS PRO
€0.297
Each (In a Pack of 10)
units
1500µF Electrolytic 16V dc Through Hole 10 (Dia.) x 20mm 20mm 20mm - 10mm -40°C +105°C 5mm - 2000h
RS Stock No. 711-2157
BrandRS PRO
€1.61
Each (In a Pack of 2)
units
68µF Electrolytic 450V dc Through Hole 18 (Dia.) x 36mm 36mm 36mm - 18mm -25°C +105°C 7.5mm - 2000h
RS Stock No. 170-1302
BrandRS PRO
€41.30
Each (In a Bag of 1000)
units
1µF Electrolytic 250V dc Through Hole 6.3 (Dia.) x 11mm 11mm 11mm - 6.3mm -25°C +105°C 2.5mm - 1000h
RS Stock No. 707-6414
BrandRS PRO
€0.76
Each (In a Pack of 5)
units
10µF Electrolytic 250V dc Through Hole 10 (Dia.) x 21mm 21mm 21mm - 10mm -25°C +105°C - - 1000h
RS Stock No. 170-1079
BrandRS PRO
€0.165
Each (In a Bag of 500)
units
10µF Electrolytic 35V dc Through Hole 6 (Dia.) x 13mm 13mm 13mm - 6mm -40°C +105°C - - 1000h
RS Stock No. 170-1176
BrandRS PRO
€0.124
Each (In a Bag of 500)
units
1000µF Electrolytic 16V dc Through Hole 10 (Dia.) x 15mm 15mm 15mm - 10mm -40°C +105°C 5mm - 2000h
RS Stock No. 170-1200
BrandRS PRO
€0.124
Each (In a Bag of 500)
units
1000µF Electrolytic 25V dc Through Hole 10 (Dia.) x 15mm 15mm 15mm - 10mm -40°C +105°C 5mm - 2000h
RS Stock No. 173-0272
BrandRS PRO
€0.164
Each (In a Bag of 500)
units
2200µF Electrolytic 10V dc Through Hole 10 (Dia.) x 17mm 17mm 17mm - 10mm -40°C +105°C 5mm - 2000h
RS Stock No. 173-0280
BrandRS PRO
€0.95
Each (In a Bag of 1000)
units
2200µF Electrolytic 50V dc Through Hole 18 (Dia.) x 36mm 36mm 36mm - 18mm -40°C +105°C 7.5mm - 2000h
RS Stock No. 711-1006
BrandRS PRO
€0.301
Each (In a Pack of 10)
units
2200µF Electrolytic 16V dc Through Hole 10 (Dia.) x 20mm 20mm 20mm - 10mm -40°C +105°C 5mm - 2000h
RS Stock No. 170-1227
BrandRS PRO
€0.206
Each (In a Bag of 250)
units
680µF Electrolytic 35V dc Through Hole 13 (Dia.) x 21mm 21mm 21mm - 13mm -40°C +105°C 5mm - 2000h
RS Stock No. 170-1237
BrandRS PRO
€0.661
Each (In a Bag of 100)
units
3300µF Electrolytic 35V dc Through Hole 16 (Dia.) x 31mm 31mm 31mm - 16mm -40°C +105°C 7.5mm - 2000h
RS Stock No. 170-1016
BrandRS PRO
€0.037
Each (In a Bag of 2000)
units
10µF Electrolytic 25V dc Through Hole 4 (Dia.) x 5mm 5mm 5mm - 4mm -40°C +105°C 1.5mm - 1000h
RS Stock No. 170-1280
BrandRS PRO
€0.025
Each (In a Bag of 1000)
units
100nF Electrolytic 100V dc Through Hole 5 (Dia.) x 11mm 11mm 11mm - 5mm -40°C +105°C 2mm - 1000h
RS Stock No. 711-0860
BrandRS PRO
€0.255
Each (In a Pack of 10)
units
2200µF Electrolytic 10V dc Through Hole 10 (Dia.) x 17mm 17mm 17mm - 10mm -40°C +105°C 5mm - 2000h
RS Stock No. 170-1152
BrandRS PRO
€0.207
Each (In a Bag of 500)
units
3300µF Electrolytic 6.3V dc Through Hole 10 (Dia.) x 20mm 20mm 20mm - 10mm -40°C +105°C 5mm - 2000h
RS Stock No. 170-1203
BrandRS PRO
€0.248
Each (In a Bag of 500)
units
2200µF Electrolytic 25V dc Through Hole 10 (Dia.) x 25mm 25mm 25mm - 10mm -40°C +105°C 5mm - 2000h
RS Stock No. 711-2040
BrandRS PRO
€0.506
Each (In a Pack of 10)
units
10µF Electrolytic 400V dc Through Hole 13 (Dia.) x 21mm 21mm 21mm - 13mm -25°C +105°C 5mm - 2000h
RS Stock No. 711-1078
BrandRS PRO
€0.042
Each (In a Pack of 100)
units
10µF Electrolytic 25V dc Through Hole 5 (Dia.) x 11mm 11mm 11mm - 5mm -40°C +105°C 2mm - 1000h
Related Products
This RS brand LHK Series 105°C Axial Aluminium ...
Description:
This RS brand LHK Series 105°C Axial Aluminium Capacitor features a safety vent construction design Suitable for a variety of purposes, it is commonly used for communication equipment applications and for switching power supply.
This RS brand LHK Series 105°C Axial Aluminium ...
Description:
This RS brand LHK Series 105°C Axial Aluminium Capacitor features a safety vent construction design Suitable for a variety of purposes, it is commonly used for communication equipment applications and for switching power supply.
Axial RS Aluminium Capacitors, LHK Series 105°C Safety ...
Description:
Axial RS Aluminium Capacitors, LHK Series 105°C Safety vent construction design Applications include communication equipment and switching power supply.
Panasonic NHG Type A electrolytic capacitors feature endurance ...
Description:
Panasonic NHG Type A electrolytic capacitors feature endurance of 1000 to 2000 hours at +105°C (dependent on case size) These radial capacitors offer a compact solution in comparison to the NHE Series. Radial lead type High reliability Long life Low ...