Schneider Electric Auxiliary Contacts Module, 2 NO + 1 NC, Plug-in, TransferPacT

The Schneider Electric function module is output module as signalling accessory. This functional module is auxiliary contact for load shedding and status output. The load shedding signal can shed some non-critical loads when ATSE is on alternate source. A status dry contact will activate the signal when transfer switch is not in auto or power is lost on two sources. The signal shall disappear when transfer switch returns to auto or power is available.

Status output when both power off or ATSE not in AUTO mod
Plug-in mounting
IP20 degree of protection