Yuasa Lead Acid Battery Charger

  • RS Stock No. 753-4692
  • Mfr. Part No. YPC2A12
  • Manufacturer Yuasa
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Yuasa Yu-PowerTN Intelligent Battery Chargers

Introducing the series of Yuasa Yu-PowerTM intelligent battery chargers that utilise multi-stage proportional timing technology to ensure safe and efficient charging of lead acid batteries. The use of proportional timing during the bulk charging mode ensures the best balance of maximum state of charge, without damaging the battery before switching to the float charging mode. Once in float charge mode the charger will charge the battery and maintain it at 100% state of charge whilst using an ECO mode to save power. The intelligence of these chargers is further demonstrated by employing a combination of cut off systems, which prevents overcharging of the battery.

Yu-PowerTM battery chargers are available in 4 options to choose from:
• Yuasa YPC2A12 - 12V / 2A - 753-4692
• Yuasa YPC4A12 - 12V / 4A - 753-4705
• Yuasa YPC8A12 - 12V / 8A - 753-4718
• Yuasa YPC4A24 - 24V / 4A - 753-4709

Features and Benefits:

• Euro to UK plug adaptor included
• Multi-stage and proportional timed charging management
• Suitable for VRLA, Automotive and Motorcycle batteries
• High-frequency switch mode design
• Multi-level charging protection

Typical Application:

Battery chargers are typically used for charging lead-acid:
• VRLA batteries
• Automotive batteries
• Motorcycle batteries
• Houshold batteries

FAQs:

What batteries do they charge?
The Yu-Power series includes battery chargers for VRLAs, cars and motorcycles. These chargers work with valve-regulated lead-acid batteries.

Is this charger supplied with clamps?
No, the charger is supplied with YPCCLIP (Torbury to clips) adaptor only. Compatible battery clamps are RS stock no: 753-4711

Can these chargers be used outdoor?
No, Yuasa Yu-PowerTM battery chargers have been designed for indoor use only.

Note

• DO NOT use with non-lead acid batteries
• DO NOT place inside a sealed container
• Yu-Power chargers must be recycled in accordance with local and national laws and regulations.

Lead Acid Yuasa

Specifications
Attribute Value
Number of Batteries Charged 1
Chemistries Charged Lead Acid
Batteries Included No
Dimensions 140 x 65 x 42mm
Charge Current 2A
Input Voltage 220 → 260V ac
Output Voltage 13.65V
Weight 450g
3 In stock for delivery within 1 working days
Unit of sale: Each
52.61
(exc. VAT)
64.71
(inc. VAT)
units
Per unit
1 - 4
€52.61
5 - 9
€49.98
10 +
€47.35
Related Products
Cut-out power supply charger for 12 V and ...
Description:
Cut-out power supply charger for 12 V and 24 V lead acid batteries3 charge control stages.Wide input voltage range.Protected against reverse polarity and short circuits.Includes EU, UK, US & AUS input plugs plus 2.1mm & 2.5mm output plugs Approval: EN ...
3-step charge control with current detection as charge ...
Description:
3-step charge control with current detection as charge termination Universal input voltage (90-264 VAC)2-pin mains connector Mounting bracket available Order mains cord separately Exchangeable DC plugs Waterproof version available
step charge control with current detection Universal input ...
Description:
step charge control with current detection Universal input voltage (90-264 VAC)Wake up and low current start-up of deeply discharged batteries With NTC input on request Error indication for reverse polarity, short circuit, charging battery packswith wrong number of cells and ...
The Mascot 9640 series plug-in, 3-stage, switch-mode lead-acid ...
Description:
The Mascot 9640 series plug-in, 3-stage, switch-mode lead-acid battery charger comes with a 3-colour LED charge status indicator It requires input voltage between 190VAC to 264VAC or 240VDC to 360VDC. The output voltage rating is 12 and the current rating ...