4 Hole Flanged Bearing Unit, PME25-XL-N, 25mm ID

  • RS Stock No. 137-1859
  • Mfr. Part No. PME25-XL-N
  • Manufacturer INA
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): SK
Product Details

Flanged Housing Units with Centring Spigot

These flanged housing units have four bolts and a centring spigot which is mounted in a turned recess into the machine structure. The centring spigot gives concentric alignment of the housings and relieves the fixing screws of any radial forces.

Features and Benefits

• Cast iron • Centring spigot
• Eccentric locking collar
• P seals
• Four-bolt units

Product Application Information

The units are used predominantly as locating bearings, but are also suitable as non-locating bearings under low loads and speeds.

Suffixes

N - Cast iron housing with undercut slot for end caps

INA

Specifications
Attribute Value
Material Cast Iron
Inside Diameter 25mm
Width 115mm
Depth 31mm
Number of Mount Holes 4
Mount Hole Size 9 mm
1 In stock for delivery within 2 working days
Unit of sale: Each
56.19
(exc. VAT)
69.11
(inc. VAT)
units
Per unit
1 - 4
€56.19
5 - 9
€53.94
10 - 24
€52.81
25 +
€51.70
Related Products
Two kits of iglidur® G dry bushes and ...
Description:
Two kits of iglidur® G dry bushes and thrust washers, offering cost-effective solutions for a variety of applications requiring compact, low-friction bearings iglidur® G is the 'all rounder' polymer bearing, having low friction, high wear resistance and high load capacity. ...
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when ...
Description:
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when machine shaft surfaces have been damaged or worn in operation SKF SPEEDI-SLEEVES eliminate the typical need to replace or rework damaged shafts caused by abrasion due to environmental contaminants, high pressures, speeds ...
Self-lube bearing units with two-piece zinc-plated pressed steel ...
Description:
Self-lube bearing units with two-piece zinc-plated pressed steel housings, fitted with bearing inserts Bore sizes 12 to 30mm & 1/2 in to 1 1/4 in internal diameter Quick fit/dismantle2-bolt & 3-bolt versions available, in Metric or Imperial sizes.
Sealed bearing units to suit metric & imperial ...
Description:
Sealed bearing units to suit metric & imperial shafts Made from cast iron to BS1452Spherical bearing insert accommodates initial misalignment Nitrile/fabric sealsC3 internal radial clearance.