2 Hole Flanged Bearing Unit, GLCTE20-XL, 20mm ID

  • RS Stock No. 191-3885
  • Mfr. Part No. GLCTE20-XL
  • Manufacturer INA
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

INA housing units are available as plummer block, flanged and take-up housing units in numerous different designs. The units are ready-to-fit and comprise INA cast iron or sheet steel housings in which INA radial insert ball bearings are fitted. In order to ensure function and reliability under all operating conditions, the bearings and housings are matched to each other. Due to the spherical outside surface of the bearing outer ring and the concave housing bore, housing units can compensate for static angular misalignment of the shaft. The units are used predominantly as locating bearings, but are also suitable as non-locating bearings under low loads and speeds. The housings are screw mounted on the adjacent construction. Less stringent tolerances are sufficient for the screw mounting surfaces.

Specifications
Attribute Value
Material Cast Iron
Inside Diameter 20mm
Length 66.5mm
Width 33mm
Depth 90.5mm
Number of Mount Holes 2
Mount Hole Size 9 mm
Mount Hole Centre-to-Centre 71.4mm
2 In stock for delivery within 2 working days
Unit of sale: Each
32.69
(exc. VAT)
39.55
(inc. VAT)
units
Per unit
1 - 4
€32.69
5 - 9
€31.39
10 - 24
€30.72
25 +
€30.08
Related Products
Adapter Sleeves are the most commonly used components ...
Description:
Adapter Sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seating, as they can be used on smooth or stepped shafts Easy to mount and require no additional location on the shaft ...
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when ...
Description:
SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when machine shaft surfaces have been damaged or worn in operation SKF SPEEDI-SLEEVES eliminate the typical need to replace or rework damaged shafts caused by abrasion due to environmental contaminants, high pressures, speeds ...
Self-lube bearing units with two-piece zinc-plated pressed steel ...
Description:
Self-lube bearing units with two-piece zinc-plated pressed steel housings, fitted with bearing inserts Bore sizes 12 to 30mm & 1/2 in to 1 1/4 in internal diameter Quick fit/dismantle2-bolt & 3-bolt versions available, in Metric or Imperial sizes.
These flanged housing units have four bolts and ...
Description:
These flanged housing units have four bolts and a centring spigot which is mounted in a turned recess into the machine structure The centring spigot gives concentric alignment of the housings and relieves the fixing screws of any radial forces. ...