2 Hole Flanged Bearing, GFL-20, 20mm ID

  • RS Stock No. 311-2780
  • Mfr. Part No. GFL-20
  • Manufacturer Igus
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

IGUS® Maintenance Free 2 Bolt Plain Bearing

These very low height plain bearings can be used with rotating, oscillating and axial movements. They are maintenance free and abrasion, temperature and corrosion resistant.

E10 tolerance on inside diameter (measured with plug gauge)
Fit into a H7 bore for high load applications
Can be used with a simple punched hole for most applications
Temperatures from -40°C to +220°C (short term), 130°C (long term) possible
Maintenance free, self lubricating
Ideal in dirty dusty conditions

Note

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.

//media.rs-online.com/t_line/L311276-01.gif
//media.rs-online.com/t_line/LD311276-01.gif
//media.rs-online.com/t_line/LD311276-02.gif

Flange Units & Pedestal / Pillow Blocks

IGUBAL® pillow block bearings are self-lubricating and require no maintenance. Designed to run dry major advantages include the bearings are extremely tolerant to dirt and dust, meaning that IGUBAL® can be used in abrasive environments.

Low weight (20% of equivalent steel)
High rigidity
Maintenance free-dry running
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30 to +80°C

Specifications
Attribute Value
Material Iglide G300
Inside Diameter 20mm
Length 60mm
Width 30mm
Depth 10mm
Number of Mount Holes 2
Mount Hole Size 6.5 mm
Mount Hole Centre-to-Centre 44mm
16 In stock for delivery within 2 working days
Unit of sale: Each
4.41
(exc. VAT)
5.42
(inc. VAT)
units
Per unit
1 - 4
€4.41
5 - 9
€4.29
10 +
€4.14
Related Products
High and very high speeds are required The ...
Description:
High and very high speeds are required The bearing arrangement must be operated with very low friction Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)High demands are ...
Designed specifically for use in industries where frequent ...
Description:
Designed specifically for use in industries where frequent thorough wash downs are necessary, optimum hygiene standards are required and good chemical resistance is important over a wide temperature range Capable of accommodating initial misalignment whilst mounting Re-lubrication is possible through ...
Self-lube bearing units with two-piece zinc-plated pressed steel ...
Description:
Self-lube bearing units with two-piece zinc-plated pressed steel housings, fitted with bearing inserts Sizes 12 to 25mm & 5/8 in to 1in IDQuick fit/dismantle2-bolt & 3-bolt versions available in Metric or Imperial sizes
IGUBAL® pillow block bearings are self-lubricating and require ...
Description:
IGUBAL® pillow block bearings are self-lubricating and require no maintenance Designed to run dry major advantages include the bearings are extremely tolerant to dirt and dust, meaning that IGUBAL® can be used in abrasive environments. Maximum loading up to 4000N ...