Cypress Semiconductor CYBLE-014008-00 Bluetooth Chip 4.1

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

CYBLE-014008-00 EZ-BLE Bluetooth Module

The CYBLE-014008-00 module contains all the necessary components to add low-power Bluetooth BLE wireless connectivity to a project design. It includes a royalty-free BLE stack compatible with the Bluetooth 4.1 standard. PSoC Creator™ provides an integrated design environment (IDE) to configure, develop, program and test a BLE application.

CY8C4 48MHz Cortex-M0 core PSoC4 with 128KB Flash memory, 16KB RAM
RF Frequency Range: 2400 to 2482MHz ISM band
RF Power Output: up to +3dBm
Receiver Sensitivity: -89dBm
OTA Data Rate: 1Mbps
Up to 25 x GPIO
CapSense™ Sigma-Delta touch sensing with SmartSense™ hardware tuning
8-channel 12-bit, 1Msps ADC with internal reference, sample-and-hold (S/H) and channel sequencer
2 x current DACs (IDACs) for general-purpose or capacitive sensing applications on any pin
Low-power comparator that operates in Deep-Sleep mode
2 x serial communication blocks (SCB) supporting I²C (master/slave), SPI (master/slave), or UART
LCD drive supported on all GPIOs (common or segment)
4 x programmable logic blocks called universal digital blocks, (UDBs), each with eight macrocells and datapath
4 x configurable operational amplifiers
PCB antenna
Bluetooth Smart Radio and Subsystem (BLESS) contains Physical Layer (PHY) and Link Layer (LL) engines
Embedded AES-128 security engine
BLE protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer and Broadcaster roles
Standard BLE profiles and services
Power modes: Active, Sleep, Deep Sleep, Hibernate and Stop
Power supply +1.8V to +5.5Vdc
Operating temperature range: -40 to +85°C
Dimensions: 11 x 11mm, SMT format
Applications: Short range communication for the Internet of Things (IoT)

Note

An evaluation board is available under RS Part No. 124-4198.

Approvals

CE, FCC, IC, MIC, KC

Specifications
Attribute Value
Bluetooth Version 4.1
Maximum Output Power +3dBm
Receiver Sensitivity -87dBm
Supported Bus Interfaces I2C, SPI, UART
Supported I/O Interfaces Serial
Dimensions 11 x 11 x 1.8mm
Height 1.8mm
Length 11mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 11mm
140 In stock for delivery within 2 working days
Unit of sale: Each
11.80
(exc. VAT)
14.28
(inc. VAT)
units
Per unit
1 +
€11.80
Packaging Options:
Related Products
The Blue Gecko BGM111 Bluetooth Smart module integrates ...
Description:
The Blue Gecko BGM111 Bluetooth Smart module integrates a Bluetooth 24GHz RF transceiver, 32-bit ARM Cortex microcontroller and a Bluetooth Smart (BLE) software stack. The on-board microcontroller allows it to operate standalone without an external processor. Bluetooth 4.1 compliant SoC, ...
Bluetooth system solutions enabling integrated Bluetooth connection for ...
Description:
Bluetooth system solutions enabling integrated Bluetooth connection for your product These modules utilise the simple AT command set for ease of design via the UART or USB peripheral interface. Supported Profiles: RFCOMM, SPP device A and BComplete Bluetooth 3.0 + ...
Panasonic’s new PAN1326C is a Host Controlled Interface ...
Description:
Panasonic’s new PAN1326C is a Host Controlled Interface (HCI) Bluetooth RF module that brings Texas Instrument’s seventh generation Bluetooth core integrated circuit, the CC2564C, to an easy-to- use module format The PAN1326C is Bluetooth-4.2 compliant and it offers best-in-class RF ...
MDBT42Q is a BT 40, BT 4.1 and ...
Description:
MDBT42Q is a BT 40, BT 4.1 and BT 4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors. ...