Nisshinbo Micro Devices NJW4814MLE-TE1, 4, Boost Converter, Boost Converter 20mA
- RS Stock No.:
- 244-9832P
- Mfr. Part No.:
- NJW4814MLE-TE1
- Manufacturer:
- Nisshinbo Micro Devices
994 In stock for delivery within 2 working days
Added
Price Each (Supplied on a Reel) Quantities below 150 on continuous strip
€1.90
(exc. VAT)
€2.34
(inc. VAT)
| Units | Per unit |
| 10 - 99 | €1.90 |
| 100 - 249 | €1.84 |
| 250 - 499 | €1.80 |
| 500 + | €1.75 |
- RS Stock No.:
- 244-9832P
- Mfr. Part No.:
- NJW4814MLE-TE1
- Manufacturer:
- Nisshinbo Micro Devices
Technical data sheets
Legislation and Compliance
Product Details
The New Japan Radio NJW4814 series is a dual H bridge driver with boost converter IC. It can boost the output voltage from Li ion battery and or a 5V power supply and drives a piezo device by two H bridge drivers. 48ms of internal fixed soft start function of the boost circuit sets a limit to start up current. The dual H bridge driver has independent signal inputs and a fault output function, therefore this product improves controllability from a microcomputer. The input frequency of this H bridge driver is up to 300kHz.
Under Voltage Lockout
Built in Thermal Shutdown
Standby Function
Boost Converter Block :
PWM Control
Operating Voltage Range of 2.7 to 5.5V
Oscillation Frequency Range of 380k to 1MHz
Soft Start Function
Over Current Protection
Over Voltage Protection
H
Built in Thermal Shutdown
Standby Function
Boost Converter Block :
PWM Control
Operating Voltage Range of 2.7 to 5.5V
Oscillation Frequency Range of 380k to 1MHz
Soft Start Function
Over Current Protection
Over Voltage Protection
H
Specifications
Attribute | Value |
|---|---|
| Regulator Function | Boost Converter |
| Maximum Output Current | 20mA |
| Number of Outputs | 4 |
| Maximum Input Voltage | 35 V |
- RS Stock No.:
- 244-9832P
- Mfr. Part No.:
- NJW4814MLE-TE1
- Manufacturer:
- Nisshinbo Micro Devices