ITT Cannon Cable Boot, 16.51mm

  • RS Stock No. 167-9540
  • Mfr. Part No. 317-1398-000/ENDGEHÄUSE SURE SEAL SS 2 POL
  • Manufacturer ITT Cannon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Sureseal Cable Boots

Seals wired cable jackets to the connector housing
Provides abrasion resistance

Note

Contacts must be ordered separately

//media.rs-online.com/t_line/L167954-07.gif

IP67 ITT Sureseal & Mini Sureseal

Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop and low contact resistance.

The simple, one-piece moulded body means that no other parts, apart from the contacts, are required to complete the connection
The plugs and receptacles are polarised to prevent mis-mating, by means of 2 stepped planes on each of the mating faces, which must be properly oriented in order for the contacts to engage
The mated connectors are IP67 rated and sealing integrity is still maintained with exposure to brake fluid, gasoline, diesel fuel, anti-freeze, ultra-violet, ozone and steam cleaning under normal operating conditions
Cable Boots, see for example, stock no. 167-9540 to seal the wired cable jacket to the connector housing are available and must be ordered separately.

Sure-Seal connectors incorporate many features:

The mini Sure-Seal range of connectors offers all the advantages of the ITT Sureseal product but with reduced size. The compact design coupled with resistance to brake fluid, anti-freeze, fuels and steam cleaning enables the connector to be used in any harsh environment area of the vehicle.

Note

Contacts must be ordered separately

Specifications
Attribute Value
Type Cable Boot
Inside Diameter Primary 16.51mm
Inside Diameter Secondary 9.65mm
Adhesive Lined No
Number of Breakouts 1
Minimum Operating Temperature -40°C
Maximum Operating Temperature +105°C
430 In stock for delivery within 2 working days
Unit of sale: Each (In a Pack of 5)
8.626
(exc. VAT)
10.437
(inc. VAT)
units
Per unit
Per Pack*
5 - 95
€8.626
€43.13
100 - 195
€7.762
€38.81
200 +
€6.986
€34.93
*price indicative
Related Products
Moulded parts that provide durable strain relief, protection ...
Description:
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and ...
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Designed for use where hazard reduction in the ...
Description:
Designed for use where hazard reduction in the event of fire is crucial Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by ...
Designed for use where hazard reduction in the ...
Description:
Designed for use where hazard reduction in the event of fire is crucial Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by ...