TE Connectivity Right Angle Cable Boot, 36mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Zero Halogen (Lipped) - 202K1 and 222K1 Series

Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting.

Features and benefits

• Low smoke Low emission properties
• Excellent sealing and strain relief
• Dielectric strength: 15MV/m

Note

If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots

Standards

DEF STAN 59/97 issue 3 Type DF

//media.rs-online.com/t_line/L279479-01.gif
Specifications
Attribute Value
Type Right Angle Cable Boot
Inside Diameter Primary 36mm
Inside Diameter Secondary 21mm
Adhesive Lined No
Number of Breakouts 1
Shrunk Diameter Primary 22.4mm
Shrunk Diameter Secondary 8.4mm
25 In stock for delivery within 2 working days
Unit of sale: Each
20.01
(exc. VAT)
24.21
(inc. VAT)
units
Per unit
1 - 14
€20.01
15 - 49
€19.01
50 +
€18.40
Related Products
Developed to meet the increased requirements for safety ...
Description:
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop ...
The TE Connectivity 40mm inner diameter black cable ...
Description:
The TE Connectivity 40mm inner diameter black cable boot is heat shrinkable moulded part that provides lightweight screening and protection It is a high-performance and reliable product that offers enhanced EMI performance. It offers screening capability with 70db attenuation up ...
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Heat shrinkable boots providing a watertight seal and ...
Description:
Heat shrinkable boots providing a watertight seal and protecting cables and equipment from corrosion and mechanical abuse, for most mass transit, military and commercial marine applications Flame retardant Adhesive sealant replaces tapes, epoxies and grease Reliable sealing on cable jackets ...