Eaton 3.15A F Ceramic Cartridge Fuse, 5 x 20mm

This range of cylindrical ceramic fuses from Eaton Bussmann is the perfect solution for short-circuit protection of semiconductors such as thyristors, diodes and triacs. Available in a range of current ratings with varying resistance values, these cartridge fuses are reliable and suitable for a variety of applications. Note that for fuses with a current rating greater than 6.3A, using open type fuse holders is recommended to reduce the risk of nuisance tripping at or near full rated current.

Why choose ceramic cartridge fuse?

Ceramic and glass cartridge fuses have similar properties. The capacity of a ceramic cartridge fuse is higher than other fuses such as a glass fuse. This means ceramic fuses can be used in circuits that have a higher current and are perfect for protecting against overheating.

What size is it?

5 mm x 20 mm is a standard cartridge size and it measures approximately 20 mm long by 5 mm in diameter. They are popular in board and panel protection and will fit a compatible 5 x 20 mm fuse holder.

What Speed is it?

This particular fuse is type ''F'' speed-rated which means a fast-acting fuse. These are designed to protect less sensitive components and are also used to protect the cabling from melting or catching fire when an overload appear. Every fast-acting fuse will have the exact speed stated which will be relevant to different overloads.

What voltage is it?

These cartridge fuses are available with 40 mA to 10 Amp current ratings for applications where the system voltage rating is 250 Volts AC.

What is an over-current?

It is a setting where a circuit experiences a current that is higher than the normal operating current.

What is Breaking Capacity?

Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. This particular cartridge fuse is HBC (High Breaking Capacity).

What are cartridge fuses used for?

• For the protection of components and equipment from costly damage used by over-current
• To isolate sub-systems from the main system once a fault has appeared

This cartridge fuse by Eaton is a durable and efficient ceramic fuse with a current rating of 3.15A, making it ideal for a variety of applications in the automation, electronics, and electrical industries. Its high rupture capacity and compact size of 5 x 20 mm ensure reliable performance and easy installation.

• Fast-acting ceramic tube fuse designed to IEC 60127-2 standards
• High rupture capacity of 1500A for maximum protection
• Voltage rating of 250V AC for versatile use in different systems
• Compact 5 x 20 mm physical size for easy installation in tight spaces
• Optional axial leads available for flexible connections

• Protecting industrial equipment from overcurrent
• Safeguarding electronic devices from voltage spikes
• Ensuring safety in power distribution systems

Yes, it is designed to provide reliable protection against short circuits and overcurrent situations.

Yes, this ceramic fuse is designed to fit in a standard 5 x 20 mm fuse holder for easy installation.

Yes, the Eaton fuse with its high rupture capacity is ideal for use in high-traffic electrical systems to ensure smooth operation.

Yes, with a voltage rating of 250V AC, this fuse can effectively handle voltage fluctuations to protect your equipment.

No, the Eaton Cartridge Fuse is designed for easy installation and does not require any special tools for setup.

Eaton formerly known as Bussmann

UL, SEMKO, VDE

Very high breaking capacity
Good mechanical/vibration characteristics

Typical Applications include short-circuit protection of semiconductors such as thyristors, diodes and triacs.
Note that with values of greater than 6.3A the use of open type fuseholders is recommended, to reduce the risk of nuisance tripping at or near full rated current.