Texas Instruments SimpleLink LaunchPad CC3200 RF MCU, WiFi Evaluation Board CC3200-LAUNCHXL
- RS Stock No.:
- 819-7420
- Mfr. Part No.:
- CC3200-LAUNCHXL
- Manufacturer:
- Texas Instruments
Subtotal (1 unit)**
€72.62
(exc. VAT)
€89.32
(inc. VAT)
Temporarily out of stock - back order for despatch when stock is available*
* Delivery dates may change based on your chosen quantity and delivery address.
Units | Per unit |
|---|---|
| 1 + | €72.62 |
**price indicative
- RS Stock No.:
- 819-7420
- Mfr. Part No.:
- CC3200-LAUNCHXL
- Manufacturer:
- Texas Instruments
CC3200-LAUNCHXL LaunchPad, SimpleLink Wi-Fi
Texas Instruments SimpleLink™ Wi-Fi® CC3200-LAUNCHXL LaunchPad evaluation kit is a development platform for the CC3200 wireless microcontroller (MCU), the industry’s first single-chip programmable MCU with built-in Wi-Fi connectivity. The board features on-board emulation using FTDI device and includes sensors for a full out-of-the-box experience. This board can be directly connected to a PC using software development platforms including CCS and IAR.
This LaunchPad comes with driver support and a software development kit (SDK) with 40+ applications for Wi-Fi protocols, internet applications, and MCU peripheral examples.
This LaunchPad comes with driver support and a software development kit (SDK) with 40+ applications for Wi-Fi protocols, internet applications, and MCU peripheral examples.
CC3200 Wi-Fi wireless MCU
USB interface to PC for CCS/IAR using FTDI USB drivers
Flash update over the USB using SimpleLink Programmer
2 20-pin connectors enables compatibility with other TI LaunchPads with added functions
Standalone development platform featuring sensors, LEDs and push-buttons
Power from USB for the LaunchPad as well as external BoosterPack
Operates from 2 AA alkaline batteries
On-board antenna and U.FL connector selectable using a capacitor re-work
Supports 4 wire JTAG and 2 Wire SWD
GNU Debugger (GDB) support over Open On chip debugger (OpenOCD)
USB interface to PC for CCS/IAR using FTDI USB drivers
Flash update over the USB using SimpleLink Programmer
2 20-pin connectors enables compatibility with other TI LaunchPads with added functions
Standalone development platform featuring sensors, LEDs and push-buttons
Power from USB for the LaunchPad as well as external BoosterPack
Operates from 2 AA alkaline batteries
On-board antenna and U.FL connector selectable using a capacitor re-work
Supports 4 wire JTAG and 2 Wire SWD
GNU Debugger (GDB) support over Open On chip debugger (OpenOCD)
WLAN (Wireless Local Area Network) - Texas Instruments