FlexLink Beam Multi-Block, strut profile 30 mm, 60 mm, Groove Size 7.2mm

  • RS Stock No. 289-9379
  • Mfr. Part No. XFAM 6
  • Manufacturer FlexLink
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Multi-Block

Multi-blocks are a versatile connector for fastening sheet material to the aluminium beams. The multi-block is inserted into the beam T-slot and fixed by turning through 90 degrees.A square nut is included, XC and XF M6, XD M5 for mounting the sheet material.,Screw length to be sheet thickness +22mm.,XC type also includes a push on clamp for an alternative method of holding the sheet material (suitable for sheet thickness 1 to 6mm).

Specifications
Attribute Value
Structural Element Type Beam
Connector Type Multi-Block
Fits Groove Size 7.2mm
Thread Size M6
Fits Strut Profile 30 mm, 60 mm
Product Family FlexLink
Material Polyamide
Product System XF
55 In stock for delivery within 2 working days
Unit of sale: Each
3.30
(exc. VAT)
4.06
(inc. VAT)
units
Per unit
1 - 4
€3.30
5 - 9
€3.20
10 +
€3.10
Related Products
These Bosch designLINE Angle Brackets have special silver ...
Description:
These Bosch designLINE Angle Brackets have special silver paint to give an attractive high-quality design for all MGE fixtures They can be used to make a strong connection between 20 x 20, 30 x 30, 40 x 40, 45 x ...
For building connections or stays of optional length ...
Description:
For building connections or stays of optional length and angle,Will connect to all XC beam sides, or 44 mm square beam ends which accept M8 threads.,Each bracket requires two M8 x 12 screws see stock no. 527-482, and two M8T-slot ...
Use to connect beam end to beam side, ...
Description:
Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nutA 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in ...
Offers high vibration resistance and a neat flush ...
Description:
Offers high vibration resistance and a neat flush finish to connect beam ends to beam sideThrough hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ...