Recom RSE DC-DC Converter, 5V dc/ 400mA Output, 4.5 → 9 V dc Input, 2W, Through Hole, +75°C Max Temp -40°C Min

The RSE is a low cost isolated, regulated and short circuit protected DC-DC converter designed for industrial applications. A compact SIP8 case size, 2:1 input, 2kVDC isolation and a wide operating temperature range of -40°C to +75°C without derating makes the RSE series ideal for industrial, transport and general purpose on-board 5 V power supplies. Industrial Class A EMC levels can be met with a simple Pi-filter and the converters come with a three-year warranty.

• 2:1 Wide Input Range
• 2k V dc /1 Second Isolation
• -40°C to +75°C Operating Temperature @ Full Load
• Industry Standard Pinout (SIP8)
• EN/UL62368, UL60950, CB Report (pending)
• Low Cost

Use this DC-DC converter from RECOM to drive high capacitive loads in industrial applications. It's regulated, so it maintains a stable output voltage of 5V DC despite any fluctuations in its input power supply, which helps to keep your network running reliably. For safety, the unit is isolated, so there's minimal risk of outside electrical noise interfering with the good function of your device. Short-circuit protection helps to reduce the chance of power surges causing damage to equipment. This converter's industry-standard pin-outs make it easy to integrate into your electrical circuit.

• Compact dimensions of 21.8 (L) x 9.2 (W) x 11.1mm (D), for maximum packing efficiency on your control board
• Suitable for demanding settings, thanks to a broad operating temperature range at full load between -40°C and +75°C
• Low typical standby current consumption of 0.75mA, so it helps you to conserve energy when not in use

• Rail industry
• Medical and health centres
• Automotive manufacturing
• Data centres

As this converter is capable of resisting vibration, it's a safe choice for demanding conditions.