Phoenix Contact PT 2.5-PE/L/L Series Grey Multi Level Terminal Block, 0.14 → 4mm², Triple-Level, Push In

The compact PT series from Phoenix Contact uses the advantages of the CLIPLINE complete system and is characterised by easy, direct conductor connection. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

• Can be bridged together easily with multi-conductor and function terminals
• Single, Double and triple levels available
• 50 % less insertion force
• Direct plugging from 0.34 mm²
• Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
• Actuation button can be operated with any kind of screwdriver
• Compact design and front connection facilitate wiring in the smallest of spaces
• Double bridge shaft for an individual power distribution and supply

Where control cabinet space is tight, this multi-level terminal block from Phoenix Contact is an easy way to safely connect and organise wires in a circuit. Three levels offer six connection points while using less space than a single-level alternative. As the levels are offset, you have free access to all three even when the terminal block is fully wired. This product is ideal for use in industrial automation or the railway industry.
A robust polyamide insulator protects your equipment from short circuits and current surges. It's also corrosion and abrasion-resistant for long-lasting performance. The push-in connection method is quick and easy and uses up to 50% less insertion force, reducing wear and tear on insulators and increasing service life.
As it benefits from Phoenix’s innovative CLIPLINE complete system, this product can easily be bridged together with multi-conductor and function terminals so you get a terminal block system that meets the needs of your setup.

• Maximum voltage rating of 500V means this terminal block is suitable for demanding industrial environments
• Flame-retardant thermoplastic housing protects against fire hazards
• Tested and certified to IEC 60947-7-1 and IEC 60947-7-2, ensuring it meets international safety standards

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.