- RS Stock No.:
- 171-7096
- Mfr. Part No.:
- B3536
- Manufacturer:
- Orbitec
10 Within 2 working day(s) (EU stock)
1180 Within 2 working day(s) (EU stock)
Added
Price Each (In a Pack of 10)
€5.143
(exc. VAT)
€6.326
(inc. VAT)
Units | Per unit | Per Pack* |
10 + | €5.143 | €51.43 |
*price indicative |
- RS Stock No.:
- 171-7096
- Mfr. Part No.:
- B3536
- Manufacturer:
- Orbitec
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- KR
Product Details
BA 15d filament lamps
Filament lamps will perform to specification and give optimum life when:
a) They are powered at the rated voltage from a stabilised 50 Hz AC supply.
b) Ambient temperature is in the range 20°C to 25°C.
c) No mechanical vibration is present.
Deviations from these criteria have a significant effect on lamp life, particularly with low current filaments (<80mA).
Power from a DC supply at the rated voltage can reduce the listed life by up to 50%.
The effect of deviation from the rated operating voltage should be noted:
5% above will reduce lamp life by up to 50%.
5% below will significantly increase lamp life.
Power consumption may vary up to ±10% compared to the listed values at the rated supply voltage. Therefore particular care should be taken when a number of lamps are connected in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
a) They are powered at the rated voltage from a stabilised 50 Hz AC supply.
b) Ambient temperature is in the range 20°C to 25°C.
c) No mechanical vibration is present.
Deviations from these criteria have a significant effect on lamp life, particularly with low current filaments (<80mA).
Power from a DC supply at the rated voltage can reduce the listed life by up to 50%.
The effect of deviation from the rated operating voltage should be noted:
5% above will reduce lamp life by up to 50%.
5% below will significantly increase lamp life.
Power consumption may vary up to ±10% compared to the listed values at the rated supply voltage. Therefore particular care should be taken when a number of lamps are connected in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Specifications
Attribute | Value |
---|---|
Wattage | 5W |
Voltage Rating | 255 V |
Lamp Base | BA15d |
Current Rating | 20 mA |
Diameter | 16mm |
Lamp Size | T5 |
Length | 35 mm |
Lens Colour | Clear |
Life Hours | 2000h |