Bosch Rexroth Galvanised Steel MGE Adjustable Foot, Strut Profile, 8mm, M8 Thread

  • RS Stock No. 390-2230
  • Mfr. Part No. 3842502257
  • Manufacturer Bosch Rexroth
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Adjustable Levelling Feet

Adjustable levelling feet with articulated base pad to accommodate irregularities in the floor
Resistant to mineral oil and organic solvents
Available with M8 thread (30mm dia base) for 8mm groove strut profiles or M12 thread (44mm dia base) for 10mm groove strut profiles

//media.rs-online.com/t_line/L390223-14.jpg
Specifications
Attribute Value
Component Type Adjustable Foot
Structural Element Type Strut Profile
Product Family Bosch Basic
Product System MGE
Fits Strut Profile 30 mm
Fits Groove Size 8mm
Thread Size M8
Material Galvanised Steel
18 Within 1 working day(s) (IE stock)
238 Within 2 working day(s) (EU stock)
Unit of sale: Each
4.26
(exc. VAT)
5.24
(inc. VAT)
units
Per unit
1 - 4
€4.26
5 - 9
€4.10
10 +
€4.00
Related Products
Swivel fastening casters, for mobile worktops, fixtures etc. ...
Description:
Swivel fastening casters, for mobile worktops, fixtures etc. Maximum loading 600Nm. Includes fasteners108 mm diameter wheels.
Medium duty, with height adjustment to compensate for ...
Description:
Medium duty, with height adjustment to compensate for variations in floor surface etc.When used with XCBL (Light) beams, an end plate should be used.Beam to be deburred and roll threaded as required.
For flat surfaces, foot plates can be used, ...
Description:
For flat surfaces, foot plates can be used, providing a cost effective method of mounting beams to the floor.Fasteners not included.For stock-no. 248-9950 use qty1 M8x30 countersunk socket screws (stock-no. 210-360) or qty4 M6´30 (stock-no. 171-922).For stock-no. 261-2188 use qty4 ...
Medium duty, with height adjustment to compensate for ...
Description:
Medium duty, with height adjustment to compensate for variations in floor surface etc.When used with XCBL (Light) beams, an end plate should be used.Beam to be deburred and roll threaded as required.