TLE4976LHALA1 Infineon,, Unipolar Hall Effect Sensor Switch, 3 → 24 V, 3-Pin SSOP

  • RS Stock No. 857-8873
  • Mfr. Part No. TLE4976LHALA1
  • Manufacturer Infineon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Hall Effect Switches, Infineon

A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.

Hall Effect Sensors, Infineon

A range of integrated circuits from Infineon utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specifications
Attribute Value
Magnetic Type Unipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point 5 mT
Maximum Magnetic Sensor Operating Point 11 mT
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 24 V
Length 4.16mm
Width 1.52mm
Height 3.29mm
Dimensions 4.16 x 1.52 x 3.29mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SSOP
Typical Magnetic Sensor Hysteresis 2 mT
Temporarily out of stock - back order for despatch 17-02-2020, delivery within 2 working days
Unit of sale: Each (On a Tape of 2000)
0.375
(exc. VAT)
0.461
(inc. VAT)
units
Per unit
Per Tape*
2000 +
€0.375
€750.00
*price indicative
Related Products
A range of Hall Effect switching ICs from ...
Description:
A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.
A range of sensor ICs from Diodes Inc ...
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique ...
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable ...
Description:
The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.A south polarity ...