Advance Tapes AT8 Black/Yellow PVC 33m Hazard Tape, 75mm x

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Hazard Warning Tapes

Hazard warning tapes help to meet statutory health and safety regulations. The colours are used for marking as indicated below.,Black/Yellow:,Radio active substances, width and height ,restrictions, moving equipment and obstructions,Red/White:,Fire fighting equipment, no smoking areas and flammable substances,Green/White:,Safety equipment, first aid points, emergency escape routes and safe areas

A low stretch PVC that will not shrink back or lift once applied
Very high adhesion level, adheres well long term to rough surfaces
Good abrasion resistance, stands up well to foot and machinery traffic
Flexible and easy to apply round irregular surface
Roll length 33m
Widths vary (see table)
For indoor and outdoor use

Advance Tapes PVC Hazard Warning Tape

The Advance Tapes hazards warning tape is a black/yellow colour, heavy-duty plasticised PVC film coated with a white, aggressive pressure-sensitive and rubber resin adhesive. This tape is 0.14mm thick, 75mm wide and 33m long. The black/yellow colours indicate radioactive substances, width and height, restrictions, moving equipment and obstructions.

Features and Benefits


Low stretch PVC that will not shrink back or lift once applied
• High adhesion level, adheres well long term to rough surfaces
• Good abrasion resistance, stands up well to foot and machinery traffic
• Flexible and easy to apply round irregular surface
• Breaking load is 26N/cm
• Elongation at break 150%
• Excellent conformability, particularly to uneven surfaces
• Non-corrosive adhesive
• Can be applied by hand or machine
• Can be walked on immediately after application

Applications


Statutory health and safety regulations
• Indoor and outdoor use

Specifications
Attribute Value
Colour Black/Yellow
Backing Material PVC
Width 75mm
Length 33m
Thickness 0.14mm
Pre-printed None
Adhesion Strength 3.5 N/cm
Tensile Strength 26N/cm
Elongation at Break 150%
Maximum Operating Temperature +60°C
Minimum Operating Temperature 0°C
Adhesive Material Rubber Resin
Model Number AT8
17 Within 1 working day(s) (IE stock)
233 Within 2 working day(s) (EU stock)
Unit of sale: Each
17.03
(exc. VAT)
20.95
(inc. VAT)
units
Per unit
1 - 9
€17.03
10 - 19
€16.34
20 +
€15.84
Related Products
AT2000 is an aluminium oxide/silicon carbide abrasive grit ...
Description:
AT2000 is an aluminium oxide/silicon carbide abrasive grit bonded to a tough and durable PVC backing with a solvent based acrylic adhesive and paper release liner designed for the many different requirements of professionals and industries such as the building, ...
AT2000 is an aluminium oxide/silicon carbide abrasive grit ...
Description:
AT2000 is an aluminium oxide/silicon carbide abrasive grit bonded to a tough and durable PVC backing with a solvent based acrylic adhesive and paper release liner designed for the many different requirements of professionals and industries such as the building, ...
Anti-Slip tapes are designed to provide an extra ...
Description:
Anti-Slip tapes are designed to provide an extra comfort, confidence and safety on floor surfaces in hazardous areas such as warehouses, factories, stairs or even boats They are ideal for use in any environment where slipping is a higher risk. ...
The Tesa 4169 black floor marking tape is ...
Description:
The Tesa 4169 black floor marking tape is a UV resistant and due to the thick backing that withstands high mechanical stress It is perfectly suitable for permanent marking applications. It is 0.18mm thick, 50mm wide and 33m long. The ...