- RS Stock No.:
- 539-6974
- Manufacturer:
- RS PRO
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 539-6974
- Manufacturer:
- RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
Product Details
RS PRO 1 x 58 W, Anti-Corrosive Light Fitting, 2, Fluorescent, Temp T4, 240 V AC
Illuminate your workspace with this anti-corrosive light fitting. It consists of two fluorescent luminaires and is designed to be used in internal and external hazardous settings. It's got a moulded GRP (glass reinforced plastic) casing that gives it sturdy protection, but it's still lightweight.
The luminaires provide good light distribution thanks to its strong polycarbonate diffuser. When the bi-pin fluorescent tubes need changing, you can do so easily - simply release the stainless-steel clips and remove the diffuser. This product doesn't require routine testing during annual maintenance inspections, as it's classed as unrestricted breathing equipment.
Its electronic HF (high-frequency) ballast provides longer tube life and lower running costs. There are two M20 cable entries (one plugged) with three wire-and-earth terminals for a 2.5 mm cable. Part of our RS PRO range, this light has been tested by engineers for reliability and durability.
The luminaires provide good light distribution thanks to its strong polycarbonate diffuser. When the bi-pin fluorescent tubes need changing, you can do so easily - simply release the stainless-steel clips and remove the diffuser. This product doesn't require routine testing during annual maintenance inspections, as it's classed as unrestricted breathing equipment.
Its electronic HF (high-frequency) ballast provides longer tube life and lower running costs. There are two M20 cable entries (one plugged) with three wire-and-earth terminals for a 2.5 mm cable. Part of our RS PRO range, this light has been tested by engineers for reliability and durability.
Features and Benefits
Anti-corrosive light fitting
Single fluorescent lamp
Suitable for hazardous areas
Zone classification of 2 (for situations that will be hazardous infrequently)
Temperature classification of T4 for a maximum temperature of +135°C
Wattage of two x 58 W
Voltage rating of 240 V AC
Dimensions of (L) 1.62 m x (W) 170 mm
Individual lamp wattage of 58 W
EEX nc II 3 GD, EN50021 compliant for safety
ATEX series XN certified for hazardous areas
Single fluorescent lamp
Suitable for hazardous areas
Zone classification of 2 (for situations that will be hazardous infrequently)
Temperature classification of T4 for a maximum temperature of +135°C
Wattage of two x 58 W
Voltage rating of 240 V AC
Dimensions of (L) 1.62 m x (W) 170 mm
Individual lamp wattage of 58 W
EEX nc II 3 GD, EN50021 compliant for safety
ATEX series XN certified for hazardous areas
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Specifications
Attribute | Value |
---|---|
Type | Anti-Corrosive |
Zone Classification | 2 |
Temperature Classification | T4 |
Wattage | 1 x 58 W |
Lamp Type | Fluorescent |
Voltage Rating | 240 V ac |
Anti-corrosive | Yes |
Length | 1620 mm |
Width | 100 mm |
Individual Lamp Wattage | 58W |
Number of Lamps | 1 |
Hazardous Area Certification | ATEX |
Series | XN |
Standards Met | EEX nc II 3 GD, EN50021 |