Baumer M23 12-Pin 5m Female Cable & Connector for use with Sensors and Actuators

  • RS Stock No. 481-7767
  • Mfr. Part No. Z 130.005
  • Manufacturer Baumer
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

SSI series Ø 58 mm multi-turn absolute Encoders

Resolution up to 8192 points / turn for 4096 turns
SSI synchronous series outputs.
Gray or binary code.
Electrical zero positioning.
Standard flange with 10 mm shaft.
Front fixing by screws or bracket support (optional).
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Small coders, efficient and robust.

Solid Shaft / Hollow Shaft Absolute Encoders

An absolute encoder provides the ability to remember the exact position following any power interruption. There is also no need for synchronisation. This is one of the reasons why absolute encoders are used where a safety standard is required (i.e. robotics industry). Typical applications are for speed or position control circuits. The features for these encoders are:

+ A unique signal for each angular position
No need for initialisation (zero reference)
Immediately after power up or after an interruption of power the position is maintained
No need for a counter to process the signal

The electrical signal of the absolute encoder is directly related to the angle of the shaft. The mechanical angular position is sensed by non contact optical elements, therefore without wear. The output of an infrared diode is transmitted through a transparent code disc and a diaphragm. The light/dark pattern is converted to an electrical signal by an array of photo diodes. The same code occurs only once per revolution. This encoder is defined as a single turn encoder.

Output circuit

Types of Code
Any electronic code is made out of a combination of bits. Each bit is characterised by a Low (0) or a High (1) signal. The combination of a series of bits is called a binary word. Several binary words make a code.

Single Step Code - Only one bit on the parallel output changes state at any given time. There is no possibility of any concurrent state changes. Single step code is very versatile and can maintain accuracy even allowing for slight misalignments of the disc and scanning device
Gray Code - This is a single step code, most absolute encoders use this code
Multiple Step Codes - Natural binary code: This type of code is similar to the decimal system, except that there are only 1 and 0. Each bit, depending on its position in the binary word, has a definite value. 20 to 2n assigned

3 Within 2 working day(s) (EU stock)
11 Within 2 working day(s) (EU stock)
Unit of sale: Each
(exc. VAT)
(inc. VAT)
Per unit
1 - 4
5 - 9
10 +
Related Products
H-BS 6 way inserts fit in H-BE 16 ...
H-BS 6 way inserts fit in H-BE 16 hoods and housingsH-BS 12 way inserts fit in H-BE 32 hoods and housings12 way version needs 6 way (1-6 pin) + 12 way (7-12 pin ) inserts For hoods and housings see ...
Binder 702 series M9 IP67 range female connectors, ...
Binder 702 series M9 IP67 range female connectors, these subminiature socket connectors are suitable for cable mounting, offering IP67 protection and a degree of connector shielding Connector with screw locking Solder bucket terminals Degree of Protection IP67 Plastic and metal ...