Siemens Single-Phase Inverter Drive, 230V AC - SINAMICS V20 Series - 6SL3210-5BB13-7BV1
Use this inverter drive from Siemens to convert frequencies to your electrical appliance to ensure it receives the proper input. The high-functioning device offers a broad output frequency range from 0 to 500Hz. It has a rated power of 0.37kW with an additional 60 seconds overload up to 150% for safe operations in current surges. You can set the parameters easily using the control buttons on the enclosure. Install this inverter on a wall or by push-through mounting and screws for a reliably secure fit.
• IP20 (ingress protection) rating indicates touch-protection against items up to 12mm in size • Compact 68mm width for space-saving, side-by-side mounting • Innovative cooling design prevents overheating
What kind of field bus communication works with this inverter drive?
This inverter can be connected to either a USS (universal serial interface) or Modbus remote terminal unit communication system. When connected to a USS protocol, it enables data reading and writing from the central hub to the output portal. The Modbus protocols allow swift transfer of data through simple 16-bit structures. By connecting it to either of these communication terminals, you can automate the inverter process and remotely monitor the data.
Attribute
Value
Power Rating
0.37 kW
Phase
1
Supply Voltage
230 V ac
Current Rating
2.3 A
Series
SINAMICS V20
For Use With
AC Motors
Field Bus Communication Type
USS/Modbus RTU
IP Rating
IP20
Output Frequency
0 → 550Hz
STO
No
Mounting Type
Side by Side Mount, Wall Mount
Overall Width
107.8mm
Overall Depth
142mm
Standards Met
CE, C-Tick (RCM), cULus, EN 60204-1, EN 61800-3, EN 61800-5-1, KCC
Siemens Single-Phase Inverter Drive, 230V AC - SINAMICS V20 Series - 6SL3210-5BB13-7BV1
Use this inverter drive from Siemens to convert frequencies to your electrical appliance to ensure it receives the proper input. The high-functioning device offers a broad output frequency range from 0 to 500Hz. It has a rated power of 0.37kW with an additional 60 seconds overload up to 150% for safe operations in current surges. You can set the parameters easily using the control buttons on the enclosure. Install this inverter on a wall or by push-through mounting and screws for a reliably secure fit.
• IP20 (ingress protection) rating indicates touch-protection against items up to 12mm in size • Compact 68mm width for space-saving, side-by-side mounting • Innovative cooling design prevents overheating
What kind of field bus communication works with this inverter drive?
This inverter can be connected to either a USS (universal serial interface) or Modbus remote terminal unit communication system. When connected to a USS protocol, it enables data reading and writing from the central hub to the output portal. The Modbus protocols allow swift transfer of data through simple 16-bit structures. By connecting it to either of these communication terminals, you can automate the inverter process and remotely monitor the data.
Attribute
Value
Power Rating
0.37 kW
Phase
1
Supply Voltage
230 V ac
Current Rating
2.3 A
Series
SINAMICS V20
For Use With
AC Motors
Field Bus Communication Type
USS/Modbus RTU
IP Rating
IP20
Output Frequency
0 → 550Hz
STO
No
Mounting Type
Side by Side Mount, Wall Mount
Overall Width
107.8mm
Overall Depth
142mm
Standards Met
CE, C-Tick (RCM), cULus, EN 60204-1, EN 61800-3, EN 61800-5-1, KCC