Ixxat USB-to-CAN FD Compact

With its CAN FD interface, the Ixxat USB-to-CAN FD compact enables a simple and flexible CAN/CAN FD bus connection of computers with USB interface. It is a suitable tool for a wide variety of CAN applications in the areas of testing, development, maintenance, and control.
The PC connection is established via a native USB 2.0 Hi-Speed port (480 Mbit/s), on the CAN bus side the device is connected via a RJ45 connector with galvanic isolation. The galvanic isolation provides reliable protection of the PC against overvoltage and voltage peaks.
Thanks to its high-performance on-board microcontroller system, the Ixxat USB-to-CAN FD compact is also able to process message bursts (11- and 29-bit identifiers, CAN 2.0 A/B) at bit rates of up to 8 Mbit/s without any loss. This also includes message filtering, accurate time stamping (1 ms resolution) and buffering of CAN frames.
A comprehensive driver and software package can be downloaded free of charge from the website (www.ixxat.com/vci)

•CAN FD and CAN high-speed in one device
•High quality and extremely reliable PC interface
•High data throughput combined with low latency
•Native USB 2.0 hi-speed (480 Mbit/s), compatible with USB 1.1 and USB 3.x
•Powerful programming interface for Windows (VCI) as well as for Linux (socketCAN or ECI), QNX and VxWorks (ECI)

•Connectors: 1 x RJ45, 1 x USB Type A
•CAN FD bit rates: Arbitration rate up to 1 Mbit/s, data rate up to 8 Mbit/s
•CAN bit rates: 10 kBit/s to 1 Mbit/s
•CAN interface: ISO CAN FD (ISO 11898-1: 2015), non-ISO CAN FD, CAN high-speed (ISO 11898-2: 2016)
•Galvanic isolation: 800 V DC for 1 sec.
•Certification: CE, UKCA, FCC