Vishay VDRS - E Series Metal Oxide Varistor 140pF 10A, Clamping 710V, Varistor 430V

  • RS Stock No. 178-071
  • Mfr. Part No. VDRS07H275BSE
  • Manufacturer Vishay
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Littelfuse Metal Oxide Varistors - LA / MA / ZA Series

Littelfuse metal oxide varistors are compact and versatile, and can be used within a wide range of applications.

The LA series of MOV’s are radial-lead varistors that are designed to be operated continuously across AC power lines.

The MA series of MOV’s are axial-lead varistors that are designed for use in a wide variety of board level industrial and commercial electronic equipment, protecting components and signal/data lines from low energy transients.

The ZA series of MOV’s are radial-lead varistors that are designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include motor control, telecom, automotive systems, solenoid, and power supply circuits to protect circuit board components and maintain data integrity.

Specifications
Attribute Value
Varistor Voltage 430V
Maximum AC Voltage Rating 275V
Maximum DC Voltage Rating 350V
Clamping Voltage 710V
Clamping Current 10A
Energy 36J
Series VDRS - E
Diameter 9mm
Maximum Surge Current 1200A
Capacitance 140pF
Thickness 4.9mm
Dimensions 9 (Dia.) x 4.9mm
Lead Pitch 5mm
610 In stock for delivery within 2 working days
Unit of sale: Each (In a Pack of 5)
0.116
(exc. VAT)
0.143
(inc. VAT)
units
Per unit
Per Pack*
5 +
€0.116
€0.58
*price indicative
Packaging Options:
Related Products
High power metal oxide varistors suitable for reducing ...
Description:
High power metal oxide varistors suitable for reducing transient voltage spikes in industrial power applications Single and two-hole fixing types for distribution bus-bar mounting Insulated plastic case types for flat surface mounting High-mass large-diameter zinc oxide element Repeatable protection against ...
Standard radial epoxy-coated MOV with tinned-copper leads Tinned ...
Description:
Standard radial epoxy-coated MOV with tinned-copper leads Tinned copper wire leads with a ceramic body coated with epoxy resin Rated for surge current (8//20 μs) and for energy (2ms).
Almost no energy consumption in stand-by mode After ...
Description:
Almost no energy consumption in stand-by mode After a surge impulse the varistor works immediately in normal mode so there is no slip current Excellent absorption at surge impulses Operating temperature:–40 ºC to +85 ºC for types up to 95 ...
Voltage surges, often referred to as spikes or ...
Description:
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current ...