RS PRO Metal Oxide Varistor 720pF, Clamping 840V, Varistor 510V

  • RS Stock No. 901-2706
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Thermally Protected MOV, Round, Two Leaded

Our RS Pro metal oxide varistors have been designed to meet the abnormal overvoltage requirements outlined in Section 39.4 of the UL1449 standard (4th edition). Under sustained voltage conditions, the Metal Oxide Varistor (MOV) lead that is connected to the thermal link opens. Meeting UL1449 4th edition requirements, these MOVs are ideal for surge protection devices without generating high cost or creating a complicated approach.

When used above their rated specification, traditional MOVs can fail to short circuit conditions or fail to open when exposed to sustained steady state overvoltage. However, the integrated thermal link used in our RS Pro range responds to temperature and voltage. This response ensures that when the MOV exceeds a certain temperature or voltage, the MOV disconnects from the line.

Our range of thermally protected MOVs react instantly to unexpected overvoltage situations and offer an excellent level of protection to components downstream. RS Pro MOVs are wave solderable, helping you to reduce cost by eliminating the rework caused by hand soldering operations.

The thermal link in our MOVs must only be used to provide protection to the varistor in cases of abnormal overvoltage. Never use a thermally protected varistor in series with the load. Our metal oxide varistors are intended for use in UL 1449 compliant surge protection device modules. However, your module design should allow for the possibility that under extreme overvoltage conditions some units may exhibit heating, arcing and venting before opening. We recommend application testing for this range.

Features and Benefits:

Thermally protected
Wave solderable
At normal operating voltages, these MOVs have low leakage current
High surge current rating up to 40 kA
Operating temperature range of -55°C to +85°C
Storage temperature range of -55°C to +125°C
Three leaded options have a fuse on either the second lead or third lead
Patented Products (U.S Patent #6636403 and IE010410)
94V-0 epoxy rating
ISO and TS16949 certification
UL1449, UL1414/CUL recognition
VDE certification


RS Pro thermally protected metal oxide varistors are suitable for a range of applications including:
AC line power supplies
AC panel protection modules
AC power meters
AC-DC power supplies
Transient Voltage Surge Suppressor (TVSS) Products
Surge protected strips
Uninterruptible power supplies
DIN Rails
White goods

Soldering Information

Our RS Pro metal oxide varistors have an integrated thermal protection device, so care must be taken when soldering the devices into place. These MOVs can be hand soldered or wave soldered. With hand soldering, we recommended heat sinking the leads of the device. With wave soldering, ensure that the preheat stage and solder bath temperatures are closely controlled.

Attribute Value
Varistor Voltage 510V
Maximum AC Voltage Rating 320V
Maximum DC Voltage Rating 420V
Clamping Voltage 840V
Energy 190J
Diameter 23mm
Maximum Surge Current 10000A
Capacitance 720pF
Length 30mm
Thickness 10.5mm
Dimensions 23 (Dia.) x 10.5mm
Lead Pitch 7.5mm
Temporarily out of stock - back order for despatch when stock is available
Unit of sale: Each (In a Bag of 5)
(exc. VAT)
(inc. VAT)
Per unit
Per Bag*
5 - 20
25 - 45
50 - 95
100 - 195
200 +
*price indicative
Related Products
High power metal oxide varistors suitable for reducing ...
High power metal oxide varistors suitable for reducing transient voltage spikes in industrial power applications Single and two-hole fixing types for distribution bus-bar mounting Insulated plastic case types for flat surface mounting High-mass large-diameter zinc oxide element Repeatable protection against ...
Almost no energy consumption in stand-by mode After ...
Almost no energy consumption in stand-by mode After a surge impulse the varistor works immediately in normal mode so there is no slip current Excellent absorption at surge impulses Operating temperature:–40 ºC to +85 ºC for types up to 95 ...
Surface mount cylindrical varistor encapsulated in thermoplastic to ...
Surface mount cylindrical varistor encapsulated in thermoplastic to UL94 V0, with tinned copper terminations PSpice models available.
The HighE series of metal oxide varistors from ...
The HighE series of metal oxide varistors from Epcos offer a surge current capability up to 100kA and are suitable for heavy duty applications Encapsulated in plastic housing, these disk-shaped metal oxide varistors have a wide operating range. Flame-retardant housing ...