Omron Motor Control Unit for use with K6CM-CIM Relay, Motor Condition Monitoring Device K6CM

  • RS Stock No. 174-9973
  • Mfr. Part No. K6CM-CICB600
  • Manufacturer Omron
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): JP
Product Details

Quantifying the status of a three-phase induction motor and pump. The alarm output threshold default is set. You can customize the value according to the site. As for comprehensive current diagnosis, the degradation can be detected comprehensively by combining each motor part and the load side. The insulation resistance of the three-phase induction motor and pump can be measured with current flowing (the secondary side leakage current of the inverter can also be detected).

Transistor output that externally outputs the status of the motor and error states
Monitoring can be performed easily on the PC by EtherNet/IP
Monitor values of vibrations, temperature, insulation resistance, and current
Self-diagnosis function of the main unit internal circuit and analog sensing circuit
Push-in Plus Terminal Technology reduces wiring work (double-insertion holes for crossover wiring)

Specifications
Attribute Value
Accessory Type Indoor Split
For Use With K6CM-CIM Relay, Motor Condition Monitoring Device K6CM
Function Motor Protection
Mounting Type Cable Mount
Series K6CM
Temporarily out of stock - back order for despatch 15-04-2020, delivery within 2 working days
Unit of sale: Each
299.52
(exc. VAT)
368.41
(inc. VAT)
units
Per unit
1 +
€299.52
Related Products
The Matrix series MAX-3 channel controller (BCU control ...
Description:
The Matrix series MAX-3 channel controller (BCU control unit) can accommodate up to three SKF 24 V dc linear actuators The Controller features a built-in power supply and incorporates microprocessor technology. It also offers three motor outputs (DIN8) for actuators, ...
SINAMICS G120 is a modular inverter system that ...
Description:
SINAMICS G120 is a modular inverter system that essentially comprises two function unit: Power Module (PM) and Control Unit (CU)The Control Unit controls and monitors the Power Module and the connected motor in several different modes. It supports communication with ...
Modular Motor Protective Circuit Breakers designed for use ...
Description:
Modular Motor Protective Circuit Breakers designed for use with add-on contactor modules and accessories (see below) which provide isolation, short circuit and thermal protection The units are DIN-rail mounting and part of the x Start family of control gear products, ...
Overload protection compensated -5 to +40°CLockable in 'OFF' ...
Description:
Overload protection compensated -5 to +40°CLockable in 'OFF' position Short circuit protection, therefore, no back-up fuse protection is required where the prospective fault level is less than the breaking capacity of the unit Expected life cycles 01 x 106Maximum switching ...