Omron Motor Control Unit for use with K6CM-CIM Relay, Motor Condition Monitoring Device K6CM

  • RS Stock No. 174-9974
  • Mfr. Part No. K6CM-CICB200
  • Manufacturer Omron
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Quantifying the status of a three-phase induction motor and pump. The alarm output threshold default is set. You can customize the value according to the site. As for comprehensive current diagnosis, the degradation can be detected comprehensively by combining each motor part and the load side. The insulation resistance of the three-phase induction motor and pump can be measured with current flowing (the secondary side leakage current of the inverter can also be detected).

Transistor output that externally outputs the status of the motor and error states
Monitoring can be performed easily on the PC by EtherNet/IP
Monitor values of vibrations, temperature, insulation resistance, and current
Self-diagnosis function of the main unit internal circuit and analog sensing circuit
Push-in Plus Terminal Technology reduces wiring work (double-insertion holes for crossover wiring)

Specifications
Attribute Value
Accessory Type Indoor Split
For Use With K6CM-CIM Relay, Motor Condition Monitoring Device K6CM
Function Motor Protection
Series K6CM
Mounting Type Cable Mount
Temporarily out of stock - back order for despatch 10-11-2020, delivery within 2 working days
Unit of sale: Each
216.34
(exc. VAT)
261.77
(inc. VAT)
units
Per unit
1 +
€216.34
Related Products
The drive is designed for modern automation systems ...
Description:
The drive is designed for modern automation systems Control can be performed easily with relay or open collector outputs. Analogue controls work with ±10V voltage. Usable motor can be permanent magnet motor with brushes,in power range of 5 to 80 ...
EM-175 motor driver is designed for DC-motor speed ...
Description:
EM-175 motor driver is designed for DC-motor speed control The unit regulates motor voltage so non regulated supply voltage is well suited. A load affecting the motor rpm can be compensated with an adjustable load compensation (RxI). Unidirectional2-quadrant, drive and ...
EM-206 is a DC-motor controller that is designed ...
Description:
EM-206 is a DC-motor controller that is designed for brushless motors with hall sensor feedback The unit has a mosfet-type high efficiency power stage. The unit is equipped with standard controls, such as speed, stop, reversing and braking. Three phase ...
The EM-241A/ EM-243A are full bridge DC-motor starters ...
Description:
The EM-241A/ EM-243A are full bridge DC-motor starters It is designed to work with DC-motor in applications where some special functions are needed.Starter has adjustable acceleration and deceleration ramps, which make possible the smooth starts and stops. Adjustable current limit ...