RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

Unipower 8 A Motor Load Monitor, 380 → 440 V


3 Within 1 working day(s) (IE stock)
28 Within 2 working day(s) (EU stock)
Add to Basket

Unit of sale Each

€569.07

(exc. VAT)

€688.57

(inc. VAT)

units

Added

RS Stock No.:
245-5941
Mfr. Part No.:
HPL110
Manufacturer:
Unipower

RoHS Status: Not Applicable

COO (Country of Origin):
DK
unitsPer unit
1 +€569.07

Digital Motor Load (kW) Monitors


Units which measure true motor load in kW featuring a digital display of kW% and programmable trips for over and/or under load events.These units protect equipment from damage caused by the motor running against a jam, blockage or under load and are also used in processes to trigger subsequent actions when predetermined load levels are reached (end point monitoring).The display is used as a reference enabling motor load, trip levels and all other variables to be displayed and programmed quickly and accurately using only three push buttons.The units are usually mounted in the motor control panel and are connected to a convenient point on the motor supply (before Inverter - if used).Therefore no external field wiring or sensors in the equipment are necessary.


In addition to displaying motor power in real time the units capture and, on demand, display the instantaneous minimum and maximum power levels to assist in setting up and fault diagnosis.Three digital delay timers, programmable from 0.1-25 seconds are incorporated to time out motor start surge and short duration over and under power events which could cause nuisance tripping.A DIP switch is used to tamper proof all settings. The HPL110 and HPL110A can be switched to either 50 or 6necessary.In0Hz operation.Both units can be operated in manual or auto-reset modes. In auto-reset mode programmable hysteresis, which provides differential between trip and reset levels is automatically enabled.The HPL 110 is DIN rail mounting whilst the HPL110A can be panel mounted.Applications include the over/underload protection of:Pumps (dry run, closed valve), Fans (broken belt, closed damper), Conveyors (screw and belt),Separation screens, Macerators, scrapers, Mechanical drives (gearboxes, chains)


AttributeValue
Motor Protection ComponentLoad Monitor
Supply Voltage380 → 440 V
Current Rating8 A
Overall Length56mm
Overall Width75mm
Overall Depth110mm
Minimum Operating Temperature-15°C
Maximum Operating Temperature+50°C
SeriesHPL
Control Voltage380 → 440 V
Enclosure TypeDin Rail, Wall Mount