Jumo di eco LCD Digital Panel Multi-Function Meter for Temperature, 36mm x 76mm

The Jumo di eco series temperature indicator is used for visualizing temperatures acquired through Pt100, Pt1000, or KTY2X-6 resistance thermometers in a 2-wire circuit. The measurement is displayed on a 3-digit display with red background lighting. Limit infringements can be monitored with a 10A changeover relay and signalled via an LED. The 3 buttons on the front panel facilitate configuration, switching differential and alarm suppression. The screw terminals on the back of the instrument make an electrical connection.
Accessories:
PT100 sensor (RS stock no. 454-2227), 6 x 50 mm protective tube, 2.5 m connection lead, silicone, -50 to +180 °C
Note:
Supply Voltage and Frequency are 230 Vac 50/60 Hz.

Microprocessor control
Adjustable switching hysteresis
Configurable alarm suppression
Code-protected parameter level
Symbols for temperature unit, minutes and seconds in display
Each parameter can be enabled individually for operation
Simple mounting
Programmable switch-on delay after power ON
Electrical connection via screw terminals

cUL approved
UL approved
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007