Schmersal RFID Non-Contact Safety Switch, 600mA, 12mm Switching Distance - RSS 36 series - RSS 36-D-R-ST
This non-contact safety switch from Schmersal offers precise position monitoring of protective components in industrial equipment. It employs RFID (radio frequency identification) technology to track laterally sliding devices and trigger the machine to stop when they move out of range. This unit is energy-efficient as it only consumes 600mA of current. Its compact dimensions of 106.3 (length) x 22 (width) x 25mm (depth) make it a good choice for applications where space is limited.
Features & Benefits
• Mission time of 20 years for reliable long-term performance • Glass fibre-reinforced thermoplastic housing for durability and impact resistance • IP69K (ingress protection) rating for resistance to dust and high-temperature, high-pressure water jets • Rated impulse withstand voltage of 0.8kV to resist sudden voltage surges for greater electrical safety • Integrated fuse for protection against short circuits
Applications
• Food and beverage processing facilities • Robotics and automation • Conveyors
Is this sensor tamper-resistant?
Yes, this switch uses magnetic coding, so it can only operate when matched with the properly coded actuator. This prevents tampering as normal magnets can't be used to override the switch.
Attribute
Value
Supply Voltage
20.4 → 26.4V dc
Safety Contacts
2 PNP
Housing Material
Glass Fibre Reinforced Thermoplastic
Connection Type
M12
Actuator Type
Coded
Sensor Principle
RFID
Safety Category
3
Actuator Included
No
Switching Distance
10 (On) mm, 12 mm, 16 (Off) mm
Series
RSS 36
IP Rating
IP65, IP67, IP69K
Supply Current
600mA
Width
22mm
Standards Met
CE Listed, cULus Listed, ECOLAB, EN 62061, EN ISO 13849-1, IEC 60947-5-3, IEC 61508, TUV
Schmersal RFID Non-Contact Safety Switch, 600mA, 12mm Switching Distance - RSS 36 series - RSS 36-D-R-ST
This non-contact safety switch from Schmersal offers precise position monitoring of protective components in industrial equipment. It employs RFID (radio frequency identification) technology to track laterally sliding devices and trigger the machine to stop when they move out of range. This unit is energy-efficient as it only consumes 600mA of current. Its compact dimensions of 106.3 (length) x 22 (width) x 25mm (depth) make it a good choice for applications where space is limited.
Features & Benefits
• Mission time of 20 years for reliable long-term performance • Glass fibre-reinforced thermoplastic housing for durability and impact resistance • IP69K (ingress protection) rating for resistance to dust and high-temperature, high-pressure water jets • Rated impulse withstand voltage of 0.8kV to resist sudden voltage surges for greater electrical safety • Integrated fuse for protection against short circuits
Applications
• Food and beverage processing facilities • Robotics and automation • Conveyors
Is this sensor tamper-resistant?
Yes, this switch uses magnetic coding, so it can only operate when matched with the properly coded actuator. This prevents tampering as normal magnets can't be used to override the switch.
Attribute
Value
Supply Voltage
20.4 → 26.4V dc
Safety Contacts
2 PNP
Housing Material
Glass Fibre Reinforced Thermoplastic
Connection Type
M12
Actuator Type
Coded
Sensor Principle
RFID
Safety Category
3
Actuator Included
No
Switching Distance
10 (On) mm, 12 mm, 16 (Off) mm
Series
RSS 36
IP Rating
IP65, IP67, IP69K
Supply Current
600mA
Width
22mm
Standards Met
CE Listed, cULus Listed, ECOLAB, EN 62061, EN ISO 13849-1, IEC 60947-5-3, IEC 61508, TUV