Eaton 3 Pole Enclosed Non Fused Isolator Switch - 20 A Maximum Current, 6.5 kW Power Rating, IP65
- RS Stock No.:
- Mfr. Part No.:
- 70020101 & T0-2-1/I1H/SVB/K-CI-K1/2
- COO (Country of Origin):
|1 - 4||€26.38|
|5 - 9||€25.30|
Eaton Enclosed Isolator Switch
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
The perfect solution for installing as a safety measure
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Switch power/capacity refers to AC23A use at 380-440V
|Number of Poles||3|
|Voltage Rating||440V ac|
|Minimum Operating Temperature||-25°C|
|Maximum Operating Temperature||+50°C|