3 Pole Panel Mount Non Fused Isolator Switch, NO, 63 A, 30 kW, IP65

  • RS Stock No. 805-5676
  • Mfr. Part No. P3-63/M4/SVB-SW
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

P3 Series Isolators With Metal Extension Shafts 30 - 100 Amp

The P3 series of switch-disconnectors with metal extension shafts are compact and robust ideal for hard wearing industrial environments with a rated uninterrupted current of up to 100 Amps. This range of isolator switch from Eaton is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. The need for this form of local isolation is most commonly needed for repair and maintenance of the electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches.

Preforms local isolation, manual override & safety switch functions
Rated uninterrupted current from 30 - 100 A
Shaft is metal to increase robustness and durability

Specifications
Attribute Value
Number of Poles 3
Maximum Current 63 A
Mounting Type Panel Mount
Normal State Configuration NO
Power Rating 30 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V ac
Switch Rating 340 A
Throw Configuration Single
Handle Colour Grey
Minimum Operating Temperature -25°C
Maximum Operating Temperature +40 (Enclosed) °C, +50 (Open) °C
Terminal Type Screw
4 In stock for delivery within 2 working days
Unit of sale: Each
59.27
(exc. VAT)
72.90
(inc. VAT)
units
Per unit
1 - 4
€59.27
5 - 9
€56.85
10 +
€55.57
Related Products
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (Mega Ohms) Insulation Resistance >100MΩThe convenience of on/off switching and overcurrent protection in one package Visual indication of breaker state via the unique, single shot moulded, two ...
These switches fully conform to IEC204, VDE 0660 ...
Description:
These switches fully conform to IEC204, VDE 0660 and IEC947 and are UL,CSA approved A full range of accessories is available. Manufactured from thermo-resistant and self-extinguishing materials (UL94-VØ) which are free from Cadmium, Halogen and Asbestos.
Perform isolation and switching with positive contact indication ...
Description:
Perform isolation and switching with positive contact indication of the electrical distribution circuitsThey are used as inlet switches on the modular distribution board, on the PLC box and cabinet or on the local box for local control of motor circuits, ...
All have a nominal voltage of 690V The ...
Description:
All have a nominal voltage of 690V The stated motor rating utilisation category AC23A/AC3 is for 3 phase 380/440V supply. Padlockable (x4) in "OFF" position Fingerproof main terminals on 20A to 63A switches Terminal shrouds supplied with 80A to 250A ...