Non-Isolated DC-DC Converter, 24V dc Output, 1.3A

  • RS Stock No. 891-3399
  • Mfr. Part No. SCD30S24-DN
  • Manufacturer SolaHD
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

SCD Series, Industrial DC to DC Converter

The SCD series encapsulated converters have been designed to power industrial control instrumentation devices and equipment in applications where the use of AC power is not possible. They have high reliability and tight regulation on even the most difficult of factory-floor conditions.Easy-to-install DIN Rail and chassis mounting makes these units extremely user friendly and helps to reduce instillation time and costs. The terminals have been designed to not only be easy to wire but also easy to access. Various options are available covering a wide range of voltages.

These units work by regulating the voltage making them ideal for sensitive equipment run from battery power. This can be important as a 24 Vdc battery can operate from as high as 30 Vdc at full charge and dip below 22 Vdc under heavy loads. These units will stabilise the voltage variation for equipment not designed to operate under those conditions.

They can also be used to convert commonly available dc voltages form industrial machinery and equipment, such as 24 Vdc, and convert them to other dc voltages that may be required by specific equipment being used within the same vicinity.

DIN Rail or Chassis mount by removing DIN clips
Rugged, encapsulated design to resist environment
IP20 protection
Wide 20 to 72 Vdc input range
M3 screw clamp terminations
Simple snap-on for DIN Rail TS35/7.5 or TS35/15
Galvanic isolation
Five year limited warranty

Sola HD Converters

Attribute Value
Input Voltage Range 20 → 72 V dc
Output Voltage 24V dc
Output Current 1.3A
Power Rating 30W
Mounting Type Chassis Mount, DIN Rail Mount
Number of Outputs 1
Length 120mm
Width 65mm
Depth 33mm
Minimum Temperature -25°C
Maximum Temperature +65°C
Regulator Type Switched Mode Power Supply
MTBF 800000h
Power Signal Conversion Type DC-DC
Load Regulation ≤0.5%
Standards Met CE, CRUus, CULus
Series SCD
Holdup Time >10ms
Special Features DIN Rail or Chassis Mount by Removing DIN Clips, Five Year Limited Warranty, Galvanic Isolation, IP20 Protection, Rugged Encapsulated Design to Resist Environment
Line Regulation ≤0.5%
Application Harsh Environment, Industrial, Remote Site, Telecom
Protection Features Over Current Protection
Weight 390g
Ripple And Noise ≤1 (Ripple) %, ≤2 (Noise) %
Temporarily out of stock - back order for despatch 04-08-2020, delivery within 2 working days
Unit of sale: Each
(exc. VAT)
(inc. VAT)
Per unit
1 - 4
5 - 9
10 - 24
25 - 49
50 +
Related Products
The concept of distributed power architecture the combination ...
The concept of distributed power architecture the combination of a centralized switching power supply with many local “on board” converter modules enables developers to come up with much more flexible and efficient designs Today, “off-the-shelf” modules are available for virtually ...
Wide 2:1 input voltage range Regulated outputs Industrial ...
Wide 2:1 input voltage range Regulated outputs Industrial & Medical safety approvals4k Vac rms input / output isolation Isolation Test Voltage 6000 Vpeak Supplementary and reinforced insulation for working voltages up to 300Vac Built-in filter meets EN 55022, Class A ...
The THN-30WI series is the latest generation of ...
The THN-30WI series is the latest generation of high performance DC/DC converter modules with highest power density The product achieves 30W output power while it comes in a metal case with dimensions of only 1.0”x 1.0”x 0.4”. All models have ...
The QHL300 series offers a compact 300W DC-DC ...
The QHL300 series offers a compact 300W DC-DC solution in an industry standard half brick package This series of modules enables effective construction of distributed power architectures from AC front ends, PFC front ends and battery systems. 180 to 425 ...