Tektronix P5200A Oscilloscope Probe, Probe Type: Differential, High Voltage 50MHz 1kV 1:50, 1:500

  • RS Stock No. 734-5029
  • Mfr. Part No. P5200A
  • Manufacturer Tektronix
Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): CN
Product Details

Tektronix Oscilloscope Probes

The Tektronix is active deferential voltage oscilloscope probe has a bandwidth of 50MHz and permits selection of 50x or 500x attenuation. It converts floating signals to low voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.
TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most commonly required set-up controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope.
The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded.
Supplied with
2 hook clips
2 pincer clips
2 alligator clips
2 extension cables
Do not use the P5200A with scopes that have floating inputs (isolated inputs), such as the Tektronix TPS2000 Series. The P5200A requires an oscilloscope or other measurement instruments with grounded inputs.

Features and Benefits

Bandwidth is DC to 50MHz
Attenuation ratio is 1:50 and 1:500
Input impedance is 5Mohmll4pF
Maximum common mode voltage is ±1.3KV
Maximum Input voltage is 1000V CAT II
Wide compensation range (7pF to 30pF)
CMRR (typical) is 100kHz: > -60dB 3.2MHz: > -30dB 100MHz: > -26dB
Overrange indicator
Safety certified
Switchable attenuation
Switchable bandwidth limit
Cable length 1.5m (THDP & TMDP), 1.8m (P52xxA)


Floating measurements
Switching power supply design
Motor drive design
Electronic ballast design
CRT display design
Power converter design and service
Power device evaluation
BNC interface (P5200A probes)
TekVPI interface (TMDP and THDP Series probes)
TekProbe interface


EN 61010-031
UL 61010-031 listed
IEC 61010-031
IP20 Rating

Attribute Value
Probe Type Differential, High Voltage
Attenuation 1:50, 1:500
Bandwidth 50MHz
Maximum Common Mode Input Voltage 1kV
Model Number p P5200A
Safety Category Level CAT II
Safety Category Voltage 1000V
Series P52XXA
Safety Category CAT II 1000 V
6 In stock for delivery within 2 working days
Unit of sale: Each
(exc. VAT)
(inc. VAT)
Per unit
1 +
Related Products
MDO3000 oscilloscopes are designed to meet users' needs ...
MDO3000 oscilloscopes are designed to meet users' needs and aspirations now and into the future Each model is multi-functional with integrated basic spectrum analyzer, Wave Inspector Navigation, MSO, serial and parallel bus triggering and analysis, and digital voltmeter. Optional instrument ...
Bandwidth DC-70 MHz Rise time ≤5 nsDC accuracy ...
Bandwidth DC-70 MHz Rise time ≤5 nsDC accuracy ±2%Attenuation ratio 50 X/500 XMaximum differential test voltage (DC + Peak AC) 50 X: 150 V, 500 X: 1500 VMaximum input common mode voltage (voltage-to-earth Vrms) 600 V CATIII, 1000 V CATIIInput ...
The Digilent BNC terminated oscilloscope probe is perfect ...
The Digilent BNC terminated oscilloscope probe is perfect to use with the Analogue Discovery™ in conjunction with the Discovery BNC adapter Bandwidth for 1x DC to 6MHz and 10x DC to 100MHz Selectable 1X/10X input attenuation Input resistance is 1x1Mohm ...
An indispensable accessory for analogue or digital oscilloscopes ...
An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground!A range of three models to fulfil different requirements1 or 2 input channels.Coaxial or banana measuring leads/long length banana leads.A model with coaxial ...